ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received February 21, 2020
Accepted April 30, 2020
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Experimental study on thermo-hydraulic performance of nanofluids in diverse axial ratio elliptical tubes with a built-in turbulator

1Jiangsu Province Engineering Laboratory of High Efficient Energy Storage Technology and Equipment, China University of Mining and Technology, Xuzhou 221116, China 2School of Electrical and Power Engineering, China University of Mining and Technology, Xuzhou 221116, China
qicong@cumt.edu.cn
Korean Journal of Chemical Engineering, September 2020, 37(9), 1466-1481(16), 10.1007/s11814-020-0566-6
downloadDownload PDF

Abstract

Due to the low heat transfer efficiency of common heat exchange systems, an improved heat exchange system was developed. Enhanced tubes (elliptical tubes with a built-in turbulator) instead of a smooth tube were used and TiO2-water nanofluids were substituted for water to intensify the heat transfer. The influences of turbulator (presence or absence), axial ratios of elliptical tubes (Z=1.235, 1.471, 1.706), nanoparticle concentration (ω=0.0 wt%, 0.1 wt%, 0.3 wt%, 0.5wt%), and Reynolds number (Re=400-12,000) on the flow and heat transfer properties of TiO2-water nanofluids were studied. Thermal and exergy efficiency were used to research the comprehensive thermo-hydraulic characteristics of these heat transfer enhancement technologies. The thermo-hydraulic properties of nanofluids all showed an increasing trend with the growing axial ratio, nanoparticle concentration and Reynolds number. Nanofluids (ω=0.5 wt%) in an elliptical tube (Z=1.706) with a built-in turbulator showed the best thermal performance, which could be increased by 33.8% in comparison with water at best. The thermal efficiency index increased first and then decreased with the Re. Nanofluids in elliptical tubes with a built-in turbulator can clearly promote heat transfer under the identical condition.

References

Wang X, Yan Y, Meng X, Chen G, Appl. Therm. Eng., 157, 113761 (2019)
Wang X, Gao X, Bao K, Hua C, Han X, Chen G, J. Therm. Sci., 28(2), 246 (2019)
Alirezaie A, Hajmohammad MH, Ahangar MRH, Esfe MH, Appl. Therm. Eng., 128, 373 (2018)
Daniel YS, Aziz ZA, Ismail Z, Bahar A, Salah F, Korean J. Chem. Eng., 36(7), 1021 (2019)
Liu X, Xuan Y, Nanoscale, 9, 14854 (2017)
Liu XL, Xuan YM, Sol. Energy, 146, 503 (2017)
Asadi A, Asadi M, Rezaniakolaei A, Rosendahl LA, Afrand M, Wongwises S, Int. J. Heat Mass Transf., 117, 474 (2018)
Samira P, Saeed ZH, Motahare S, Mostafa K, Korean J. Chem. Eng., 32(4), 609 (2015)
Nasiri M, Etemad SG, Bagheri R, Korean J. Chem. Eng., 28(12), 2230 (2011)
Sheremet MA, Pop I, Mahian O, Int. J. Heat Mass Transf., 116, 751 (2018)
Astanina MS, Sheremet MA, Oztop HF, Abu-Hamdeh N, Int. J. Heat Mass Transf., 118, 527 (2018)
Miroshnichenko IV, Sheremet MA, Oztop HF, Abu-Hamdeh N, Int. J. Heat Mass Transf., 125, 648 (2018)
Mikhailenko SA, Sheremet MA, Oztop HF, Abu-Hamdeh N, Int. J. Mech. Sci., 156, 137 (2019)
Selimefendigil F, Oztop HF, Int. J. Heat Mass Transf., 129, 265 (2019)
Izadi M, Behzadmehr A, Shahmardan MM, Korean J. Chem. Eng., 31(1), 12 (2014)
Sajjadi H, Delouei AA, Izadi M, Mohebbi R, Int. J. Heat Mass Transf., 132, 1087 (2019)
Mohebbi R, Izadi M, Sajjadi H, Delouei AA, Sheremet MA, Physica A, 526, 120831 (2019)
Hu Y, He Y, Gao H, Zhang Z, Appl. Therm. Eng., 155, 650 (2019)
Li Z, Shahsavar A, Al-Rashed AA, Talebizadehsardari P, Appl. Therm. Eng., 167, 114777 (2020)
Ma X, Sheikholeslami M, Jafaryar M, Shafee A, Nguyen-Thoi T, Li Z, J. Clean Prod., 245, 118888 (2018)
Li Z, Sheikholeslami M, Ayani M, Shamlooei M, Shafee A, Waly M, Tlili I, Physica A, 524, 540 (2019)
Sheikholeslami M, Arabkoohsar A, Khand I, Shafee A, Li Z, J. Clean Prod., 221, 885 (2019)
Li Z, Sheikholeslami M, Chamkha AJ, Raizah ZA, Saleem S, Comput. Method. Appl. Mech. Eng., 338, 618 (2018)
Sheikholeslami M, Jafaryar M, Ganji DD, Li Z, J. Mol. Liq., 262, 104 (2018)
Sheikholeslami M, Jafaryar M, Li ZX, Int. J. Heat Mass Transf., 124, 980 (2018)
Al-Rashed AA, Shahsavar A, Entezari S, Moghimi MA, Adio SA, Nguyen TK, Appl. Therm. Eng., 155, 247 (2019)
Al-Rashed AA, Ranjbarzadeh R, Aghakhani S, Soltanimehr M, Afrand M, Nguyen TK, Physica A, 521, 724 (2019)
Alsarraf J, Moradikazerouni A, Shahsavar A, Afrand M, Salehipour H, Tran MD, Physica A, 520, 275 (2019)
Nojoomizadeh M, Karimipour A, Firouzi M, Afrand M, Int. J. Heat Mass Transf., 119, 891 (2018)
Naphon P, Nakharintr L, Wiriyasart S, Int. J. Heat Mass Transf., 126, 924 (2018)
Sajid MU, Ali HM, Renew. Sust. Energ. Rev., 103, 556 (2019)
Sarafraz MM, Nikkhah V, Nakhjavani M, Arya A, Exp. Therm. Fluid Sci., 91, 509 (2018)
Sarafraz MM, Arya H, Arjomandi M, J. Mol. Liq., 263, 382 (2018)
Sarafraz MM, Safaei MR, Tian Z, Goodarzi M, Bandarra Filho EP, Arjomandi M, Energies, 12, 1929 (2019)
Nasiri M, Etemad SG, Bagheri R, Korean J. Chem. Eng., 28(12), 2230 (2011)
Kim S, Yoo H, Kim C, Korean J. Chem. Eng., 29(10), 1321 (2012)
Mohebbi R, Izadi M, Delouei AA, Sajjadi H, J. Therm. Anal. Calorim., 135, 3029 (2018)
Sun B, Yang AM, Yang D, Int. J. Heat Mass Transf., 107, 712 (2017)
Karimi A, Al-Rashed AA, Afrand M, Mahian O, Wongwises S, Shahsavar A, Int. J. Mech. Sci., 156, 397 (2019)
Naphon P, Wiriyasart S, Int. J. Heat Mass Transf., 118, 297 (2018)
Naphon P, Wiriyasart S, Int. J. Heat Mass Transf., 125, 1054 (2018)
Naphon P, Wiriyasart S, Arisariyawong T, Int. J. Heat Mass Transf., 118, 1152 (2018)
Qi C, Liu MN, Wang GQ, Pan YH, Liang L, Chin. J. Chem. Eng., 26(12), 2420 (2018)
Qi C, Yang L, Chen T, Rao Z, Appl. Therm. Eng., 129, 1315 (2018)
Pak BC, Cho YI, Exp. Heat. Transf., 11, 151 (1998)
Qi C, Wan YL, Li CY, Han DT, Rao ZH, Int. J. Heat Mass Transf., 115, 1072 (2017)
Qi C, Wang GQ, Yan YY, Mei SY, Luo T, Energy Conv. Manag., 166, 744 (2018)
Kline SJ, Mech. Eng., 75, 3 (1953)
Sieder EN, Tate GE, Ind. Eng. Chem., 28, 1429 (1936)
Gnielinski V, Int. Chem. Eng., 16, 359 (1976)
Qi C, Liang L, Rao ZH, Int. J. Heat Mass Transf., 94, 316 (2016)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로