Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received January 6, 2021
Accepted February 1, 2021
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Biodiesel production from jatropha seeds with bead-type heterogeneous catalyst
Department of Chemical Engineering, Kongju National University, Cheonan 31080, Korea 1Department of Chemical Science and Engineering, School of Engineering, Kathmandu University, Dhulikhel, Nepal 2School of Environmental Engineering, University of Seoul, Seoul 02504, Korea
jkjeon@kongju.ac.kr
Korean Journal of Chemical Engineering, April 2021, 38(4), 763-770(8), 10.1007/s11814-021-0759-7
Download PDF
Abstract
This study adapted two types of heterogeneous catalysts to the process of manufacturing biodiesel through a two-stage process using Jatropha oil as a raw material. The acid value of Jatropha oil prepared in this study was 11.3mgKOH/g, and it could be reduced to less than 0.4mgKOH/g via 2 h of esterification using the Amberlyst-15 catalyst. The pretreated oil was used as a raw material for transesterification in a Carberry spinning catalyst basket reactor equipped with a bead-type dolomite catalyst, as the bead-type dolomite catalyst prepared with 20 wt% pseudoboehmite sol as an inorganic binder was found to be the optimal catalyst for the transesterification reaction. The spent dolomite bead catalyst could be regenerated and reused twice without a loss of activity during transesterification. However, the catalyst when repeatedly regenerated three times nearly lost its active sites, which is attributed to the conversion of CaO to CaCO3 during the regeneration and reuse procedure.
References
Alba-Rubio AC, Santamaria-Gonzalez J, Merida-Robles JM, Moreno-Tost R, Martin-Alonso D, Jimenez-Lopez A, Maireles-Torres P, Catal. Today, 149(3-4), 281 (2010)
Yang ZQ, Xie WL, Fuel Process. Technol., 88(6), 631 (2007)
Lee HV, Juan JC, Taufiq-Yap YH, Renew. Energy, 74, 124 (2015)
Demirbas A, Energy Conv. Manag., 50(1), 14 (2009)
Vyas AP, Subrahmanyam N, Patel PA, Fuel, 88(4), 625 (2009)
Nizah MFR, Taufiq-Yap YH, Rashid U, Teo SH, Nur ZAS, Islam A, Energy Conv. Manag., 88, 1257 (2014)
Liu YY, Lu HF, Jiang W, Li DS, Liu SJ, Liang B, Chin. J. Chem. Eng., 20(4), 740 (2012)
Lam MK, Lee KT, Mohamed AB, Biotechnol. Adv., 28(4), 500 (2010)
Agarwal M, Chauhan G, Chaurasia SP, Singh K, J. Taiwan Inst. Chem. Eng., 43(1), 89 (2012)
Bournay L, Casanave D, Delfort B, Hillion G, Chodorge JA, Catal. Today, 106(1-4), 190 (2005)
Taufiq-Yap YH, Fitriyah N, Sains Malaysiana, 40(6), 587 (2011)
Colombo K, Ender L, Barros AAC, Egypt. J. Pet., 26(2), 341 (2017)
Chai M, Tu QS, Lu MM, Yang YJ, Fuel Process. Technol., 125, 106 (2014)
Ilgen O, Fuel Process. Technol., 92(3), 452 (2011)
Farque MO, Razzak SA, Hossain MM, Catalysts, 10(9), 1 (2020)
Fattah IMR, Ong HC, Mahlia TMI, Mofijur M, Silitonga AS, Rahman SMA, Ahmad A, Front. Energy Res., 8, 101 (2020)
AbdelSalam H, El-Maghrbi HH, Zahran F, Zaki T, Korean J. Chem. Eng., 37(4), 670 (2020)
Jasen P, Marchetti JM, IJLCT, 7(4), 325 (2012)
https://www.chemengonline.com/catalyst-testing-design-selectionlaboratory-reactors-2/?pagenum=1.
Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquerol J, Sing KS, Pure Appl. Chem., 87, 1051 (2015)
Heo SJ, Kim MJ, Lee JS, Park YC, Jeon JK, Korean J. Chem. Eng., 36(5), 660 (2019)
Rahman NJA, Ramli A, Jumbri K, Uemura Y, Sci. Rep., 9(1), 1 (2019)
Kim MJ, Kim HJ, Jeong KE, Jeong SY, Park YK, Jeon JK, Korean J. Chem. Eng., 16(4), 539 (2010)
Leung DYC, Wu X, Leung MKH, Appl. Energy, 87(4), 1083 (2010)
Choi JD, Kim DK, Park JY, Rhee YW, Lee JS, Korean J. Chem. Eng., 46(1), 194 (2008)
Satterfield CN, Heterogeneous catalysis in industrial practice, 2nd Ed., McGraw-Hill, New York, NY (1991).
Kim J, Han J, Kwon TS, Park YK, Jeon JK, Catal. Today, 232, 69 (2014)
Akhtar F, Andersson L, Ogunwumi S, Hedin N, Bergstrom L, J. European Ceram. Soc., 34(7), 1643 (2014)
Vajglova Z, Kumar N, Maki-Arvela P, Eranen K, Peurla M, Hupa L, Murzin DY, Org. Process. Res. Dev., 23(1), 2456 (2019)
Catarino M, Martins S, Dias APS, Pereira MFC, Gomes J, J. Environ. Chem. Eng., 7(3), 103099 (2019)
Yang ZQ, Xie WL, Fuel Process. Technol., 88(6), 631 (2007)
Lee HV, Juan JC, Taufiq-Yap YH, Renew. Energy, 74, 124 (2015)
Demirbas A, Energy Conv. Manag., 50(1), 14 (2009)
Vyas AP, Subrahmanyam N, Patel PA, Fuel, 88(4), 625 (2009)
Nizah MFR, Taufiq-Yap YH, Rashid U, Teo SH, Nur ZAS, Islam A, Energy Conv. Manag., 88, 1257 (2014)
Liu YY, Lu HF, Jiang W, Li DS, Liu SJ, Liang B, Chin. J. Chem. Eng., 20(4), 740 (2012)
Lam MK, Lee KT, Mohamed AB, Biotechnol. Adv., 28(4), 500 (2010)
Agarwal M, Chauhan G, Chaurasia SP, Singh K, J. Taiwan Inst. Chem. Eng., 43(1), 89 (2012)
Bournay L, Casanave D, Delfort B, Hillion G, Chodorge JA, Catal. Today, 106(1-4), 190 (2005)
Taufiq-Yap YH, Fitriyah N, Sains Malaysiana, 40(6), 587 (2011)
Colombo K, Ender L, Barros AAC, Egypt. J. Pet., 26(2), 341 (2017)
Chai M, Tu QS, Lu MM, Yang YJ, Fuel Process. Technol., 125, 106 (2014)
Ilgen O, Fuel Process. Technol., 92(3), 452 (2011)
Farque MO, Razzak SA, Hossain MM, Catalysts, 10(9), 1 (2020)
Fattah IMR, Ong HC, Mahlia TMI, Mofijur M, Silitonga AS, Rahman SMA, Ahmad A, Front. Energy Res., 8, 101 (2020)
AbdelSalam H, El-Maghrbi HH, Zahran F, Zaki T, Korean J. Chem. Eng., 37(4), 670 (2020)
Jasen P, Marchetti JM, IJLCT, 7(4), 325 (2012)
https://www.chemengonline.com/catalyst-testing-design-selectionlaboratory-reactors-2/?pagenum=1.
Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquerol J, Sing KS, Pure Appl. Chem., 87, 1051 (2015)
Heo SJ, Kim MJ, Lee JS, Park YC, Jeon JK, Korean J. Chem. Eng., 36(5), 660 (2019)
Rahman NJA, Ramli A, Jumbri K, Uemura Y, Sci. Rep., 9(1), 1 (2019)
Kim MJ, Kim HJ, Jeong KE, Jeong SY, Park YK, Jeon JK, Korean J. Chem. Eng., 16(4), 539 (2010)
Leung DYC, Wu X, Leung MKH, Appl. Energy, 87(4), 1083 (2010)
Choi JD, Kim DK, Park JY, Rhee YW, Lee JS, Korean J. Chem. Eng., 46(1), 194 (2008)
Satterfield CN, Heterogeneous catalysis in industrial practice, 2nd Ed., McGraw-Hill, New York, NY (1991).
Kim J, Han J, Kwon TS, Park YK, Jeon JK, Catal. Today, 232, 69 (2014)
Akhtar F, Andersson L, Ogunwumi S, Hedin N, Bergstrom L, J. European Ceram. Soc., 34(7), 1643 (2014)
Vajglova Z, Kumar N, Maki-Arvela P, Eranen K, Peurla M, Hupa L, Murzin DY, Org. Process. Res. Dev., 23(1), 2456 (2019)
Catarino M, Martins S, Dias APS, Pereira MFC, Gomes J, J. Environ. Chem. Eng., 7(3), 103099 (2019)
