ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received September 29, 2021
Accepted October 18, 2021
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Plasma etching of SiO2 contact hole using perfluoropropyl vinyl ether and perfluoroisopropyl vinyl ether

Department of Chemical Engineering and Department of Energy Systems Research, Ajou University, Worldcup-ro 206, Yeongtong-gu, Suwon 16499, Korea
changkoo@ajou.ac.kr
Korean Journal of Chemical Engineering, January 2022, 39(1), 63-68(6), 10.1007/s11814-021-0987-x
downloadDownload PDF

Abstract

Perfluoropropyl vinyl ether (PPVE) and perfluoroisopropyl vinyl ether (PIPVE) are used for plasma etching of SiO2 contact holes. When etching is performed on blanket SiO2 samples, the etch rates in the PPVE/Ar plasma are higher than those in the PIPVE/Ar plasma at all bias voltages. In contrast, when hole-pattern (100 nm in diameter) SiO2 samples are etched, the etch rates of the SiO2 hole in the PIPVE/Ar plasma are higher than those of the SiO2 hole in the PPVE/Ar plasma. This can be attributed to excess production of CF3+ ions in PIPVE than in PPVE, and higher contribution of physical sputtering to plasma etching in PIPVE than in PPVE. The angular dependence of the SiO2 etch rates examined using a Faraday cage reveals that the effect of physical sputtering on the SiO2 etching is greater in the PIPVE/Ar plasma than in the PPVE/Ar plasma.

References

Kim JH, Cho SW, Park CJ, Chae H, Kim CK, Thin Solid Films, 637, 43 (2017)
Cho BO, Hwang SW, Lee GR, Moon SH, J. Vac. Sci. Technol. A, 18(6), 2791 (2000)
Lee JK, Lee GR, Min JH, Moon SH, J. Vac. Sci. Technol. A, 25(5), 1395 (2007)
Kim JH, Kim CK, Korean J. Chem. Eng., 37(2), 374 (2020)
Karecki S, Pruette L, Reif R, J. Electrochem. Soc., 145(12), 4305 (1998)
Fracassi F, d'Agostino R, J. Vac. Sci. Technol. B, 16(4), 1867 (1998)
Samukawa S, Mukai T, Tsuda KI, J. Vac. Sci. Technol. A, 117, 2551 (1999)
Chinzei Y, Feurprier Y, Ozawa M, Kikuchi T, Horioka K, Ichiki T, Horiike Y, J. Vac. Sci. Technol. A, 18(1), 158 (2000)
Kim JH, Park JS, Kim CK, Thin Solid Films, 669, 262 (2019)
Morikawa Y, Chen W, Hayashi T, Uchida Y, Jpn. J. Appl. Phys., 42, 1429 (2003)
Nagai M, Hayashi T, Hori M, Okamoto H, Jpn. J. Appl. Phys., 45, 7100 (2006)
Kim JH, Park JS, Kim CK, ECS J. Solid State Sci. Technol., 7, Q218 (2018)
Allgood CC, Adv. Mater., 10(15), 1239 (1998)
Kim JH, Park JS, Kim CK, Appl. Surf. Sci., 669, 262 (2019)
Kim JH, Cho SW, Kim CK, Chem. Eng. Technol., 40(12), 2251 (2017)
Cho SW, Kim CK, Lee JK, Moon SH, Chae H, J. Vac. Sci. Technol. A, 30, 051301 (2012)
Karahashi K, Yanai K, Ishikawa K, Tsuboi H, Kurihara K, Nakamura M, J. Vac. Sci. Technol. A, 22(4), 1166 (2004)
Hamblen DP, Cha-Lin A, J. Electrochem. Soc., 135, 1816 (1988)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로