Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
All issues
Development of Chemical and Mechanical Acceleration Stress Test Method for PEMFC Polymer Membranes
Abstract
To improve the durability of polymer electrolyte membrane fuel cell polymer membranes, it is important to evaluate their
durability in a short time. In 2016, the U.S. Department of Energy (DOE) presented the AST protocol, a degradation method
that simultaneously performs electrochemical and mechanical degradation. The AST protocol has several problems such as
long evaluation time, electrode degradation due to open circuit voltage changes, and diffi culty in determining whether the
durability of the polymer membrane is electrochemically or mechanically weaker. Based on the DOE accelerated stress test
protocol, we supplied O 2 instead of air to the cathode, increased the drying time, distinguished and improved electrochemical/
mechanical evaluation methods. The improved AST protocol reduced the evaluation time of the Nafi on XL membrane
electrode assembly by approximately 3 times or more, and the degradation of the electrode catalyst was also reduced by
1/3. In addition, it was confi rmed that the polymer membrane exhibited weaker mechanical durability than electrochemical;
hence, it was possible to ascertain the cause of the degradation, such that the durability of the polymer membrane can be
evaluated more accurately.
