Overall
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received September 9, 2022
Accepted December 8, 2022
- This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Most Cited
Aqueous Two-Phase Extraction of Amoxicillin Using Miniaturization Technology
Abstract
Antibiotics discharged with medical waste have had a negative impact on humans as well as aquatic organisms. Because
of the severity of its eff ects and the frequency with which it appears in medical effl uent, extraction has become obligatory.
Conducting mass transfer operations in microchannels is a promising technology that has several benefi ts over traditional
methods. In this study, the potential of performing two-phase aqueous extraction of amoxicillin in a microchannel setup
was investigated. To fully comprehend the process, it was necessary to study the system's hydrodynamics and consider the
variables that had the greatest infl uence on the extraction in the microchannel. In the hydrodynamics part, the inlet junction
showed an insignifi cant eff ect on the fl ow pattern type while the fl ow rate and volume fraction had a major eff ect. The
plug fl ow zone was chosen for the microchannel extraction based on its high surface area and ease of separation. Aqueous
two-phase system extraction (ATPS) was conducted in a microchannel to extract amoxicillin from the aqueous phase. Three
process parameters were investigated, namely temperature, salt concentration, and volume fraction, which showed a direct
proportionality infl uence on extraction effi ciency. The optimum operation conditions obtained were found to be, a temperature
of 44.3 °C, a salt concentration of 42.6 wt.%, and a volume fraction of 0.45. This was accomplished in 1.96 min as compared
to the 540 min reported for the conventional ATPS.
References
Intensified decontamination of amoxicillin drug wastewater
assisted by liquid-phase micro extraction method. Environ. Technol.
43 , 1551 (2022)
2. M. Al-Azzawi, F.S. Mjalli, A. Husain, M. Al-Dahhan, A review
on the hydrodynamics of the liquid–liquid two-phase fl ow in the
microchannels. Ind. Eng. Chem. Res. 60 , 5049 (2021)
3. I.M. Al-Riyami, M. Ahmed, A. Al-Busaidi, B. Choudri, Antibiotics
in wastewaters: a review with focus on Oman. Appl Water Sci
8 , 1 (2018)
4. S. Al-Saidi, F.S. Mjalli, M. Al-Azzawi, B. Abutarboosh, M.A.
AlSaadi, T. Al-Wahaibi, Amoxicillin removal from medical wastewater
using an eco-friendly aqueous two-phase extraction system.
Sep. Sci. Technol. 1 , 34 (2022)
5. M. Alberto, Aqueous Two-Phase Systems: Properties, Functions
and Advantages (Nova Science Publishers, Hauppauge, 2018)
6. R. Andreozzi, M. Canterino, R. Marotta, N. Paxeus, Antibiotic
removal from wastewaters: the ozonation of amoxicillin. J. Hazard.
Mater. 122 , 243 (2005)
7. J.R. Dean, Extraction Methods for Environmental Analysis (Wiley,
Chichester, 1998)
8. A.L. Grilo, M. Raquel Aires-Barros, A.M. Azevedo, Partitioning
in aqueous two-phase systems: fundamentals, applications and
trends. Sep. Purif. Rev. 45 , 68 (2016)
9. M.N. Kashid, D.W. Agar, Hydrodynamics of liquid–liquid slug
fl ow capillary microreactor: fl ow regimes, slug size and pressure
drop. Chem. Eng. J. 131 , 1 (2007)
10. M.N. Kashid, A. Renken, L. Kiwi-Minsker, Gas–liquid and liquid–
liquid mass transfer in microstructured reactors. Chem. Eng.
Sci. 66 , 3876 (2011)
11. A.B. Kayitmazer, S.P. Strand, C. Tribet, W. Jaeger, P.L. Dubin,
Eff ect of polyelectrolyte structure on protein−polyelectrolyte
coacervates: coacervates of bovine serum albumin with poly (diallyldimethylammonium
chloride) versus chitosan. Biomacromol 8 ,
3568 (2007)
12. A. Kumari, N.S. Maurya, B. Tiwari, Hospital wastewater treatment
scenario around the globe. Current Developments in
Biotechnology and Bioengineering (Elsevier, London, 2020),
pp.549–570
13. Y. Liu, B. Shi, Hollow fi ber supported liquid membrane for extraction
of ethylbenzene and nitrobenzene from aqueous solution: a
Hansen solubility parameter approach. Sep. Purif. Technol. 65 ,
233 (2009)
14. J. A. Moulijn, A. Stankiewicz, in Process intensifi cation , eds. by
V. Strezov, J. Zoeller, M. Abraham. Encyclopedia of Sustainable
Technologies, vol 3. (Elsevier, London, 2017), pp. 509–518
15. E. Norabadi, A.H. Panahi, R. Ghanbari, A. Meshkinian, H.
Kamani, S.D. Ashrafi , Optimizing the parameters of amoxicillin
removal in a photocatalysis/ozonation process using box-behnken
response surface methodology. Desalin. Water Treat. 192 , 234
(2020)
16. S. Rahdar, S. Ahmadi, The removal of amoxicillin with zno nanoparticles
in combination with us-H 2 O 2 advanced oxidation processes
from aqueous solutions. Iran. J. Health Sci. 7 , 36 (2019)
17. A. Salim, M. Fourar, J. Pironon, J. Sausse, Oil-water two-phase
fl ow in microchannels: fl ow patterns and pressure drop measurements.
Can. J. Chem. Eng. 86 , 978 (2008)
18. H. Santana, J. Silva, B. Aghel, J. Ortega-Casanova, Review on
microfl uidic device applications for fl uids separation and water
treatment processes. SN Appl. Sci. 2 , 1 (2020)
19. A.A. Yagodnitsyna, A.V. Kovalev, A.V. Bilsky, Flow patterns of
immiscible liquid-liquid fl ow in a rectangular microchannel with
t-junction. Chem. Eng. J. 303 , 547 (2016)
Publisher's Note Springer Nature remains neutral with regard to
jurisdictional claims in published maps and institutional affi liations.
Springer Nature or its licensor (e.g. a society or other partner) holds
exclusive rights to this article under a publishing agreement with the
author(s) or other rightsholder(s); author self-archiving of the accepted
manuscript version of this article is solely governed by the terms of
such publishing agreement and applicable law.