|
Total 9 articles [ 키워드: Loading ] |
No. |
Article |
1 |
Korean Chemical Engineering Research, 61 (4), pp.555-560 (2023) 3-메틸아미노프로필아민과 N-메틸-2-피롤리돈을 포함한 저수계 흡수제의 CO2 포집 특성 Absorption Characteristics of Water-Lean Solvent Composed of 3-(Methylamino)propylamine and N-Methyl-2-Pyrrolidone for CO2 Capture 왕슈아이, 홍정현, 유정균, et al. |
2 |
Korean Chemical Engineering Research, 55 (5), pp.679-684 (2017) Fe/BEA 제올라이트 촉매의 N2O/NO 동시 환원 반응에서 금속 담지 방법이 촉매 활성에 미치는 영향 Effect of Metal Loading Methods on the Catalytic Activity for N2O/NO Simultaneous Reduction over Fe/BEA Zeolite Catalyst 전민욱, 이승재, 유인수, et al. |
3 |
Korean Chemical Engineering Research, 54 (4), pp.494-500 (2016) 에탄올 향상을 위한 탈아세틸화 백합나무 당화액의 발효저해물질 제거와 semi-동시당화발효 Improved Ethanol Production from Deacetylated Yellow Poplar (Liriodendron tulipifera) by Detoxification of Hydrolysate and Semi-SSF 김조은, 이재원 |
4 |
Korean Chemical Engineering Research, 51 (3), pp.313-318 (2013) 질소산화물 환원과 N2O 생성에 있어서 V2O5-WO3/TiO2 촉매의 V2O5 함량 영향 The Effect of Vanadium(V) Oxide Content of V2O5-WO3/TiO2 Catalyst on the Nitrogen Oxides Reduction and N2O Formation 김진형, 최주홍 |
5 |
Korean Chemical Engineering Research, 50 (6), pp.1002-1007 (2012) 이산화탄소 흡수 공정에서 흡수액 최적 재생 조건에 대한 이론적 고찰 Theoretical Study on Optimal Conditions for Absorbent Regeneration in CO2 Absorption Process 박성열 |
6 |
Korean Chemical Engineering Research, 44 (5), pp.483-488 (2006) Remote 플라즈마에서 위치 및 반응기체에 따른 PMMA의 식각 특성 분석 Influence of Loading Position and Reaction Gas on Etching Characteristics of PMMA in a Remote Plasma System 고천광, 이원규 |
7 |
HWAHAK KONGHAK, 39 (4), pp.438-445 (2001) 접선유입방식 여과포 집진장치에서 내통이 유동장 및 입자거동에 미치는 영향 Effect of an Inner Tube on the Flow Field and Particle Behavior inside a Bag Filter System with a Tangential Inlet 박석주, 최호경, 김상도, et al. |
8 |
HWAHAK KONGHAK, 36 (3), pp.364-368 (1998) 티타니아 담지 MCM-41 및 KIT-1 메조포러스 물질의 수열 안정성 및 흡착성질 Hydrothermal Stabilities and Adsorption Properties of Titania Loaded on MCM-41 and KIT-1 Mesoporous Materials 강태구, 김종호, 서곤, et al. |
9 |
HWAHAK KONGHAK, 34 (1), pp.83-90 (1996) 단일교차점기법에 의한 천연고무내 카본블랙 부하량의 최적화 Optimization of Carbon Black Loading in Compounding of Natural Rubber by Unique Cross Point Technique 손봉영, 박찬영 |
|
|