무수염화마그네슘을 2-에틸 헥산올（EH）에 녹이고 무수프탈산(PA), 내부 전자공여체(IED)인 디이소부틸프탈산(DIBP)을 첨가하여 재침전법에 의해 고활성 고입체규칙성 마그네슘 담지형 촉매인 MgCl₂/EH/PA/TiCl₄/DIBP촉매를 제조하였다. 외부 전자공여체(EED)인 삼에톡시펜닐실레인(PTES)이 존재하지 않은 경우 또는 존재할 경우 각각 삼에틸알루미늄(TEA)양의 변화에 따라 상압, 슬러리상으로 프로필렌을 중합하여, 활성과 입체규칙성에 미치는 TEA, PTES의 영향을 고찰하였다. 또한 중합 온도에 따른 활성과 이소텍틱 지수(I.I.), 수소 첨가에 의한 I.I.와 분자량 변화도 고찰하였다. PTES가 존재하지 않을 때, TEA/Ti 몰비가 25에서 최대 활성값을 갖지만, PTES가 존재할 때는 그 몰비가 50 정도에서 최대 평균 활성을 가졌다. I.I. 값은, PTES가 존재하지 않을 때 TEA양의 증가에 따라 떨어지는 반면에, PTES가 존재하는 경우, TEA양이 증가해도 96% 이상으로 아주 높게 유지되었다. 온도 증가에 따른 I.I.값은 활성과 함께 50℃까지 증가하였고 60℃에서는 줄어들었다. 수소의 첨가는 활성을 증가시키고 폴리프로필렌의 분자량과 I.I.값을 감소시켰다. 촉매에 내부 전자공여체인 DIBP를 포함하지 않은 MPT촉매는 MPDT촉매의 경우처럼 외부 전자공여체인 PTES가 존재할 때 I.I.값이 존재하지 않을 경우에 비해 약간 증가시켰다. PA를 첨가하지 않은 MDT촉매도 MPDT촉매와 비교하여 연구하였다.

The highly active and stereospecific MgCl₂-supported catalysts, MPDT（MgCl₂/EH/PA/TiCl₄/DIBP） was prepared by precipitation method from MgCl₂ solution containing MgCl₂, 2-ethyl hexanol(EH), and phthalic anhydride(PA). Propylene polymerizations were carried out in a slurry reactor under atmos-pheric pressure using the MPDT catalyst cocatalyzed with TEA(triethylaluminum) in the absence of phenyl triethoxy silane(PTES) and in the presence of PTES as external electron donor(EED) to study the effect of TEA and PTES concentration on the activity and stereospecificity. The effect of polymerization temperature on the isotactic index(I.I.) and the activity was studied. The influence of the hydrogen addition on the I.I. and the molecular weight was also observed. In the absence of PTES, maximum average polymerization rate(R_{p, max}) was obtained at the mole ration of TEA/Ti of 25. R_{p, max} was, however, obtained at the TEA/Ti ratin of 50 in the presence of PTES. Isotacticity decreased as the TEA/Ti molar ratio is increased in the absence of PTES. In contrast, I.I. was higher than 96% in the presence of PTES in spite of increasing the TEA/Ti molar ratio. The increase of temperature above 50℃ decreased the isotactic index as well sa the activity. The addition of hydrogen enhanced the activity and decreased the isotactic index(I.I.) of the polypropylene to a small extent. MPT(MgCl₂/EH/PA/TiCl₄) catalyst without DIBP slightly increased isotactic index in the presence of PTES. The characteristics of MDT(MgCl₂/EH/TiCl₄/DIBP) catalyst without PA were also compared with those of MPDT catalyst.

Barbe PC, Cechin G, Noristi L, Adv. Polym. Sci., 81, 1 (1986)
Pino P, Mulhaupt R, Angew. Chem.-Int. Edit., 19, 857 (1980) 
Pino P, Mulhaupt R, "Transition Metal Catalyzed Polymerization," ed. by Quirk, R.P., MMI Press Symp., Series Part A, Cambridge, Univ. Press, p. 1 (1988)
Kim I, Choi HK, Han TK, Woo SI, J. Polym. Sci. A: Polym. Chem., 30, 2263 (1992) 
Terano M, Kataoka T, Keii T, Makromol. Chem., 188, 1477 (1987) 
Kim I, Woo SI, Polym.(Korea), 15(4), 417 (1991)
Kim I, Woo SI, Polym.(Korea), 15(6), 687 (1991)
Kim I, Woo SI, Polym.(Korea), 16(5), 570 (1992)
Chien JCW, Hu Y, J. Polym. Sci. A: Polym. Chem., 26, 2003 (1988) 
Chien JCW, Hu Y, J. Polym. Sci. A: Polym. Chem., 26, 2973 (1988) 
Chien JCW, Hu Y, J. Polym. Sci. A: Polym. Chem., 27, 897 (1989) 
Chien JCW, Hu Y, J. Polym. Sci. A: Polym. Chem., 28, 273 (1990) 
Soga K, Shiono T, "Transition Metal Catalyzed Polymerization," ed. by Quirk, R.P. et. al., Cambridge Univ. Press, p. 266 (1988)
Spitz R, Masson P, Bobichon C, Guyot A, Makromol. Chem., 190, 717 (1989) 
Spitz R, Masson P, Bobichon C, Guyot A, Makromol. Chem., 189, 1043 (1988) 
Spitz R, Robichon C, Guyot A, Duranel L, J. Mol. Catal., 56, 156 (1989) 
Kloka M, Kashiwa N, European Patent, 282,341 (1988)
Kloka M, Kashiwa N, Chem. Abstr., 110, 173953 (1989)
Kissin YV, "Isospecific Polymerization of Olefins," Springer-Verlag, New York, p. 2 (1985)
Yermakov YI, Butatov GD, Zakharov YI, Makromol. Chem., 175, 3035 (1974) 
Chien JCW, Hsieh JTT, J. Polym. Sci. A: Polym. Chem., 14, 1915 (1976)
Doi YI, Murata M, Yano K, Ind. Eng. Chem. Prod. Res. Dev., 21, 580 (1982) 
Sergeev SA, Butatov GD, Zakharov YI, Makromol. Chem., 185, 2377 (1984) 
Pakkamen TT, Vahasarija E, Pakkamen TA, Fskola E, Sormanen P, J. Catal., 121, 248 (1990) 
Soga K, Sano T, Ohnish R, Polym. Bull., 4, 157 (1979)
Soga K, Chen SI, Ohnish R, Polym. Bull., 8, 473 (1982) 
Busico V, Corradini P, Demartino V, Proto A, Albizati E, Makromol. Chem., 187, 1115 (1986) 
Seppala JV, Harkonen M, Luciani L, Makromol. Chem., 190, 2535 (1989) 
Sergeeve SA, Bukatov GF, Zakharov VA, Makromol. Chem., 185, 2 (1984)
Petkov L, Komitov P, Eur. Polym. J., 20, 619 (1989)
Guastalla G, Gianninni U, Makromol. Chem. Rapid Commun., 4, 519 (1983)