Articles & Issues
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
방해판이 부착된 교반조의 교반소요동력의 추정
Estimation of Power Input in a Baffled Agitated Vessel
HWAHAK KONGHAK, February 1995, 33(1), 46-55(10), NONE
Download PDF
Abstract
본 연구에서는 난류역 완전방해판 조건하의 교반소요동력을 기왕의 연구자의 결과와 본 실험결과와의 비교, 검토를 행하였으며 양호한 동력상관식을 제시한다._x000D_
NP=7.09(np)0.7(b/d)(H/D)0.18 np0.7(b/d)<1_x000D_
NP=7.09{(np)0.7(b/d)}0.7(H/D)0.18 np0.7(b/d)≥1_x000D_
또한 교반 impeller 부착위치에 따른 동력수의 추산식을 제시한다._x000D_
Np(min)=Np(max)-2.47np1.32(b/d)1.71 np1.32(b/d)1.71≤2.87_x000D_
Np(min)=Np(max)-7.06 np1.32(b/d)1.71>2.87
In the present study, power input in the totally baffled agitated vessels was compared systematically in connection with several previous studies and adequate power input correlation was found to be:_x000D_
NP=7.09(np)0.7(b/d)(H/D)0.18 np0.7(b/d)<1_x000D_
NP=7.09{(np)0.7(b/d)}0.7(H/D)0.18 np0.7(b/d)≥1_x000D_
Power number correlation was also formulated experimentally, which was dependent upon the position of the impeller in the stirred vessels, as follows:_x000D_
Np(min)=Np(max)-2.47np1.32(b/d)1.71 np1.32(b/d)1.71≤2.87_x000D_
Np(min)=Np(max)-7.06 np1.32(b/d)1.71>2.87
References
Nagata S, "Mixing Principles and Applications," Koudansha Ltd. (1975)
Bates RL, Fondy PL, Corpstein RR, Ind. Eng. Chem. Process Des. Dev., 2, 310 (1963)
Takeda K, Hoshino T, Taguchi H, Hujii T, Kag. Kog., 32, 376 (1968)
Komori S, Murakami Y, AIChE J., 34, 932 (1988)
Rushton JH, Costich EW, Everett HJ, Chem. Eng. Prog., 46, 394 (1950)
Takeda K, Hoshino K, Shimizu S, Nishihata T, Kag. Kog., 32, 369 (1968)
Nishigawa M, Hashimoto S, Hashimoto K, Kag. Kog. Ronbunshu, 5, 59 (1979)
Mochizuki M, Sato K, Kag. Kog. Ronbunshu, 10, 49 (1984)
Sasakura H, Kato A, Tamamura S, Ooi S, Kag. Kog. Ronbunshu, 4, 595 (1978)
Sano Y, Usui H, J. Chem. Eng. Jpn., 18, 47 (1985)
Bates RL, Ind. Eng. Chem., 5, 1245 (1959)
Bates RL, Fondy PL, Corpstein RR, Ind. Eng. Chem. Process Des. Dev., 2, 310 (1963)
Takeda K, Hoshino T, Taguchi H, Hujii T, Kag. Kog., 32, 376 (1968)
Komori S, Murakami Y, AIChE J., 34, 932 (1988)
Rushton JH, Costich EW, Everett HJ, Chem. Eng. Prog., 46, 394 (1950)
Takeda K, Hoshino K, Shimizu S, Nishihata T, Kag. Kog., 32, 369 (1968)
Nishigawa M, Hashimoto S, Hashimoto K, Kag. Kog. Ronbunshu, 5, 59 (1979)
Mochizuki M, Sato K, Kag. Kog. Ronbunshu, 10, 49 (1984)
Sasakura H, Kato A, Tamamura S, Ooi S, Kag. Kog. Ronbunshu, 4, 595 (1978)
Sano Y, Usui H, J. Chem. Eng. Jpn., 18, 47 (1985)
Bates RL, Ind. Eng. Chem., 5, 1245 (1959)