Articles & Issues
- Language
- korean
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received February 1, 2011
Accepted February 21, 2011
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
열분해 조건에 따른 슬러지 Char 특성 변화
Effect of Reaction Conditions of Pyrolysis on the Characteristics of Sludge Char
1서울시립대학교 환경공학부, 130-743 서울시 동대문구 전농동 90 2서울시립대학교 에너지환경시스템공학과, 130-743 서울시 동대문구 전농동 90
1School of Environmental Engineering, University of Seoul, 90 Jeonnong-dong, Dongdaemun-gu, Seoul 130-743, Korea 2Graduate School of Energy and Environmental System Engineering, University of Seoul, 90 Jeonnong-dong, Dongdaemun-gu, Seoul 130-743, Korea
catalica@uos.ac.kr
Korean Chemical Engineering Research, December 2011, 49(6), 851-856(6), NONE Epub 28 November 2011
Download PDF
Abstract
본 연구에서는 하수슬러지의 열분해로 촤를 제조하였고, 열분해 반응 조건이 슬러지 촤의 특성에 미치는 영향을 조사하였다. 열분해 온도가 300 ℃에서 800 ℃로 증가함에 따라 슬러지 char의 비표면적은 증가하였으나, 700 ℃에서는 일시적으로 감소하였다. 열분해 속도는 char의 비표면적과 기공부피에 미치는 영향이 크지 않은 것으로 나타났다. 반면, 열분해 반응시간이 증가함에 따라 비표면적과 기공부피는 증가하였으나, 평균 기공크기는 감소하는 결과를 나타내었다.
In this study, char was produced via pyrolysis of sewage sludge and the effects of reaction conditions(temperature, heating rate, reaction time) on characteristics of char were investigated. As temperature increased from 300 ℃ to 800 ℃, the surface area of sludge char increased in general but decreased at 700℃ temporarily. The effect of heating rate on specific surface area and pore volume of char was not large. Meanwhile, specific surface area and pore volume_x000D_
increased with reaction time but average pore diameter decreased.
Keywords
References
Ioannidou O, Zabaniotou A, Renew Sustain Energy Rev., 11(9), 1966 (2007)
Lopez G, Olazar M, Artetxe M, Amutio M, Elordi G, Bilbao J, J. Anal. Appl. Pyrolysis., 85(1-2), 339 (2009)
Guo J, Lua AC, J. Anal. Appl. Pyrolysis., 46(2), 113 (1998)
Paris O, Zollfrank C, Zickler GA, Carbon., 43(1), 53 (2005)
Lu GQ, Low JCF, Liu CY, Lua AC, Fuel., 74(3), 344 (1995)
Li W, Yang K, Peng J, Zhang L, Guo S, Xia H, Ind. Crop. Prod., 28(2), 190 (2008)
Rio S, Coq LL, Faur C, Lecomte D, Cloirec PL, Process Saf. Environ.Protect., 84(4), 258 (2006)
Wu FC, Tseng RL, Hu CC, Micropo. Mesopo. Mater., 80(1-3), 95 (2005)
Ayllon M, Aznar M, Sanchez JL, Gea G, Arauzo J, Chem. Eng. J., 121(2-3), 85 (2006)
Inguanzo M, Dominguez A, Menendez JA, Blanco CG, JJ, J. of Anal. Appl. Pyrolysis., 63(1), 209 (2001)
Demirbas A, J. Anal. Appl.Pyrolysis., 72(2), 243 (2004)
Chen X, Jeyaseelan S, Graham N, Waste Manag., 22(7), 755 (2002)
Onay O, Fuel Process. Technol., 88(5), 523 (2007)
Lopez G, Olazar M, Artetxe M, Amutio M, Elordi G, Bilbao J, J. Anal. Appl. Pyrolysis., 85(1-2), 339 (2009)
Guo J, Lua AC, J. Anal. Appl. Pyrolysis., 46(2), 113 (1998)
Paris O, Zollfrank C, Zickler GA, Carbon., 43(1), 53 (2005)
Lu GQ, Low JCF, Liu CY, Lua AC, Fuel., 74(3), 344 (1995)
Li W, Yang K, Peng J, Zhang L, Guo S, Xia H, Ind. Crop. Prod., 28(2), 190 (2008)
Rio S, Coq LL, Faur C, Lecomte D, Cloirec PL, Process Saf. Environ.Protect., 84(4), 258 (2006)
Wu FC, Tseng RL, Hu CC, Micropo. Mesopo. Mater., 80(1-3), 95 (2005)
Ayllon M, Aznar M, Sanchez JL, Gea G, Arauzo J, Chem. Eng. J., 121(2-3), 85 (2006)
Inguanzo M, Dominguez A, Menendez JA, Blanco CG, JJ, J. of Anal. Appl. Pyrolysis., 63(1), 209 (2001)
Demirbas A, J. Anal. Appl.Pyrolysis., 72(2), 243 (2004)
Chen X, Jeyaseelan S, Graham N, Waste Manag., 22(7), 755 (2002)
Onay O, Fuel Process. Technol., 88(5), 523 (2007)
