Articles & Issues
- Language
- english
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received March 9, 2015
Accepted May 4, 2015
- This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Recovery of Acetic Acid from An Ethanol Fermentation Broth by Liquid-Liquid Extraction (LLE) Using Various Solvents
Department of Environmental Engineering, Kongju National University, Cheonan, Chungnam, 31080, Korea 1Department of Chemical Engineering and Research Center Chemical Technology, Hankyong National University, Anseong, Gyeonggi-do 17579, Korea
bhum11@hknu.ac.kr
Korean Chemical Engineering Research, December 2015, 53(6), 695-702(8), 10.9713/kcer.2015.53.6.695 Epub 30 November 2015
Download PDF
Abstract
Liquid-liquid extraction (LLE) using various solvents was studied for recovery of acetic acid from a synthetic ethanol fermentation broth. The microbial fermentation of sugars presented in hydrolyzate gives rise to acetic acid as a byproduct. In order to obtain pure ethanol for use as a biofuel, fermentation broth should be subjected to acetic acid removal step and the recovered acetic acid can be put to industrial use. Herein, batch LLE experiments were carried out at 25°C using a synthetic fermentation broth comprising 20.0 g l-1 acetic acid and 5.0 g l-1 ethanol. Ethyl acetate (EtOAc), tri-n-octylphosphine oxide (TOPO), tri-n-octylamine (TOA), and tri-n-alkylphosphine oxide (TAPO) were utilized as solvents, and the extraction potential of each solvent was evaluated by varying the organic phase-to-aqueous phase ratios as 0.2, 0.5, 1.0, 2.0, and 4.0. The highest acetic acid extraction yield was achieved with TAPO; however, the lowest ethanol-to-acetic acid extraction ratio was obtained using TOPO. In a single-stage batch extraction, 97.0 % and 92.4 % of acetic acid could be extracted using TAPO and TOPO when the ratio of organic-to-aqueous phases is 4:1 respectively. A higher solvent-to-feed ratio resulted in an increase in the ethanol-to-acetic acid ratio, which decreased both acetic acid purity and acetic acid extraction yield.
References
van Heiningen A, Pulp Paper Canada, 107(6), 38 (2006)
Cogan TM, Appl. Bacteriol., 63, 551 (1987)
Oliva-Neto PD, Yokoya F, Bioresour. Technol., 63(1), 17 (1998)
Rodriguez-Lopez J, Romani A, Gonzalez-Munoz MJ, Garrote G, Parajo JC, Holzforschung, 66, 591 (2012)
Um BH, Hanley TR, Korean J. Chem. Eng., 25(5), 1094 (2008)
Drysdale GS, Fleet GH, Am. J. Enol. Vitic., 39(2), 143 (1988)
Shimazu Y, Watanabe M, J. Ferment. Technol., 59(1), 27 (1981)
Galanakis CM, Kordulis C, Kanellaki M, Koutinas AA, Bekatorou A, Lycourghiotis A, Bioresour. Technol., 114, 492 (2012)
Delfini C, Costa A, Am. J. Enol. Vitic., 44(1), 86 (1993)
Radler F, Yeast-metabolism of organic acids, in: Fleet GH (Eds.), Wine microbiology and biotechnology, Harwood Academic Publishers, Philadelphia, USA(1983).
Klosowski G, Mikulski D, Grajewski J, Blajet-Kosicka A, Bioresour. Technol., 101(9), 3147 (2010)
Pawelzik P, Carus M, Hotchkiss J, Narayan R, Selke S, Wellisch M, Weiss M, Wicke B, Parel MK, Resour. Conserv. Recycl., 73, 211 (2013)
Um BH, Korean Chem. Eng. Res., 51(5), 561 (2013)
Xu ZP, Afacan A, Chuang DT, Can. J. Chem. Eng., 77(4), 676 (1999)
Anasthas HM, Gaikar VG, Sep. Sci. Technol., 36(12), 2623 (2001)
Wiencek JM, Qutubuddin S, Sep. Sci. Technol., 27, 1211 (1992)
Um BH, Friedman B, van Walsum GP, Holzforschung, 65, 51 (2011)
Ricker NL, Michaels JN, King CJ, J. Sep. Proc. Technol., 1, 36 (1979)
King CJ, Chem. Tech., 5, 285 (1992)
Senol A, J. Chem. Eng. Jpn., 32(6), 717 (1999)
Sabolova E, Schlosser S, Martak J, J. Chem. Eng. Data, 46, 735 (2001)
Helsel RW, Chem. Eng. Prog., 73(5), 55 (1977)
Niitsu M, Sekine T, Bull. Chem. Soc. Jpn., 51, 705 (1978)
Wardell JM, King CJ, J. Chem. Eng. Data, 23, 144 (1978)
Hano T, Matsumoto M, Ohtake T, Sasaki K, Kawano Y, J. Chem. Eng. Jpn., 23, 260 (1990)
Reisinger H, King CJ, Ind. Eng. Chem. Res., 34(3), 845 (1995)
Juang RS, Wu RT, Sep. Purif. Technol., 17(3), 225 (1999)
Al-Mudhaf HF, Hegazi MF, Abu-Shady AI, Sep. Purif. Technol., 27(1), 41 (2002)
Wisniewski M, Pierzchalska M, J. Chem. Technol. Biotechnol., 80(12), 1425 (2005)
Walton S, van Heiningen A, van Walsum P, Bioresour. Technol., 101(6), 1935 (2010)
Cogan TM, Appl. Bacteriol., 63, 551 (1987)
Oliva-Neto PD, Yokoya F, Bioresour. Technol., 63(1), 17 (1998)
Rodriguez-Lopez J, Romani A, Gonzalez-Munoz MJ, Garrote G, Parajo JC, Holzforschung, 66, 591 (2012)
Um BH, Hanley TR, Korean J. Chem. Eng., 25(5), 1094 (2008)
Drysdale GS, Fleet GH, Am. J. Enol. Vitic., 39(2), 143 (1988)
Shimazu Y, Watanabe M, J. Ferment. Technol., 59(1), 27 (1981)
Galanakis CM, Kordulis C, Kanellaki M, Koutinas AA, Bekatorou A, Lycourghiotis A, Bioresour. Technol., 114, 492 (2012)
Delfini C, Costa A, Am. J. Enol. Vitic., 44(1), 86 (1993)
Radler F, Yeast-metabolism of organic acids, in: Fleet GH (Eds.), Wine microbiology and biotechnology, Harwood Academic Publishers, Philadelphia, USA(1983).
Klosowski G, Mikulski D, Grajewski J, Blajet-Kosicka A, Bioresour. Technol., 101(9), 3147 (2010)
Pawelzik P, Carus M, Hotchkiss J, Narayan R, Selke S, Wellisch M, Weiss M, Wicke B, Parel MK, Resour. Conserv. Recycl., 73, 211 (2013)
Um BH, Korean Chem. Eng. Res., 51(5), 561 (2013)
Xu ZP, Afacan A, Chuang DT, Can. J. Chem. Eng., 77(4), 676 (1999)
Anasthas HM, Gaikar VG, Sep. Sci. Technol., 36(12), 2623 (2001)
Wiencek JM, Qutubuddin S, Sep. Sci. Technol., 27, 1211 (1992)
Um BH, Friedman B, van Walsum GP, Holzforschung, 65, 51 (2011)
Ricker NL, Michaels JN, King CJ, J. Sep. Proc. Technol., 1, 36 (1979)
King CJ, Chem. Tech., 5, 285 (1992)
Senol A, J. Chem. Eng. Jpn., 32(6), 717 (1999)
Sabolova E, Schlosser S, Martak J, J. Chem. Eng. Data, 46, 735 (2001)
Helsel RW, Chem. Eng. Prog., 73(5), 55 (1977)
Niitsu M, Sekine T, Bull. Chem. Soc. Jpn., 51, 705 (1978)
Wardell JM, King CJ, J. Chem. Eng. Data, 23, 144 (1978)
Hano T, Matsumoto M, Ohtake T, Sasaki K, Kawano Y, J. Chem. Eng. Jpn., 23, 260 (1990)
Reisinger H, King CJ, Ind. Eng. Chem. Res., 34(3), 845 (1995)
Juang RS, Wu RT, Sep. Purif. Technol., 17(3), 225 (1999)
Al-Mudhaf HF, Hegazi MF, Abu-Shady AI, Sep. Purif. Technol., 27(1), 41 (2002)
Wisniewski M, Pierzchalska M, J. Chem. Technol. Biotechnol., 80(12), 1425 (2005)
Walton S, van Heiningen A, van Walsum P, Bioresour. Technol., 101(6), 1935 (2010)