Articles & Issues
- Language
- korean
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received September 24, 2015
Accepted July 11, 2016
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
CPFD 시뮬레이션을 통한 Shroud 노즐 및 수직 구조물이 설치된 기포 유동층 반응기내에서의 기포 흐름 해석
CPFD Simulation of Bubble Flow in a Bubbling Fluidized Bed with Shroud Nozzle Distributor and Vertical Internal
성균관대학교 화학공학과, 16419 경기도 수원시 장안구 서부로 2066 1한화케미칼 중앙연구소, 34128 대전광역시 유성구 가정로 76
School of Chemical Engineering, Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon, 16419, Korea 1Hanwha Chemical R&D Center, 76, Gajeong-ro, Yuseong-gu, Daejeon, 34128, Korea
dhlee@skku.edu
Korean Chemical Engineering Research, October 2016, 54(5), 678-686(9), 10.9713/kcer.2016.54.5.678 Epub 6 October 2016
Download PDF
Abstract
본 연구에서는 내경 0.3 m, 높이 2.4 m인 기-고 유동층 반응기 내에서 수직 방향의 내부 구조물과 shroud 노즐 분산판이 기포 흐름에 미치는 영향을 CPFD (Computational Particle-Fluid Dynamics)를 이용하여 모델링을 수행하였다. 층물질로는 Metal-grade 실리콘 입자(MG-Si)가 사용되었으며 dp= 149 μm, ρp = 2,325 kg/m3, Umf = 0.02 m/s이다. 전체층물질의 양은 75 kg이며 정적층(static bed) 높이는 0.8 m이다. 수직 내부 구조물이 기포 상승속도에 미치는 영향을 파악하였다. 내부 구조물이 분산판으로부터 0.45 m 높이에 설치되었을 때 기포의 분쇄가 일어났다. 유동층의 압력강하 및 수직 고체체류량 분포는 내부 구조물의 영향을 크게 받지 않는 것으로 나타났다. 하지만 내부 구조물이 제트에 너무 가까운 경우 기포가 분쇄되지 않고 내부 구조물을 우회하여 상승하였으며 내부 구조물이 없는 경우나 0.45 m 높이에 설치된 경우에 비해 더 빠른 속도로 상승하였다.
The effect of internal and shroud nozzle distributor to bubbling fluidized beds which has the size of 0.3 m-ID × 2.4 m-high column was modeled by CPFD (Computational Particle-Fluid Dynamics). Metal-grade silicon particles (MG-Si) were used as bed materials which have dp = 149 μm, ρp = 2,325 kg/m3 and Umf = 0.02 m/s. Total bed inventory and static bed height were 75 kg and 0.8 m, respectively. Effect of vertical internal on the bubble rising velocity was investigated. Bubbles were split by internal when the axial position of the internal from the distributor, z = 0.45 m. Bed pressure drop and axial solid holdup were not affected by internal. However, in the case that axial distance of internal from distributor was too close to jet penetration length, bubbles were not separated and bypassed internal, and faster than without internal or z = 0.45 m.
References
Jiang P, Bi HT, Jean RH, Fan LS, AIChE J., 37, 1392 (1991)
Zheng CG, Tung YK, Xia YS, Hun B, Kwauk M, Fluidization, 91, 168 (1991)
Zheng CG, Tung YK, Li HZ, Kwauk M, Fluidization VII, 275 (1992)
Zhu JX, Salah M, Zhou YM, J. Chem. Eng. Jpn., 30(5), 928 (1997)
Snider DM, J. Comput. Phys., 170, 523 (2001)
Zhong WQ, Yu AB, Zhou GW, Xie J, Zhang H, Chem. Eng. Sci., 140, 16 (2016)
Lim JH, Shin JH, Bae K, Kim JH, Lee DH, Han JH, Lee DH, Korean J. Chem. Eng., 32(9), 1938 (2015)
Lim JH, Lee Y, Shin JH, Bae K, Han JH, Lee DH, Powder Technol., 266, 312 (2014)
Wen CY, Yu YH, Chem. Eng. Prog. Symp., 62, 100 (1966)
Ergun S, Chem. Eng. Prog., 48, 89 (1952)
Gidaspow D, “Multiphase Flow and Fluidization Continuum and Kinetic Theory Description,” Academic Press, Boston(1994).
Baldwin BS, Lomax H, “Thin Layer Approximation and Algebraic Model for Separated Turbulent Flows,” 16th Aerospace Sciences Meeting. doi:10.2514/6.1978-257(1978).
Karimipour S, Pugsley T, Powder Technol., 220, 63 (2012)
Lim JH, Bae K, Shin JH, Kim JH, Lee DH, Han JH, Lee DH, Powder Technol., 288, 315 (2016)
Andrews MJ, Orourke PJ, Int. J. Multiph. Flow, 22(2), 379 (1996)
O'Rourke PJ, Zhao P, Snider D, Chem. Eng. Sci., 64(8), 1784 (2009)
Batchelor GK, J. Fluid Mech., 193, 75 (1988)
Williams FA, “Combustion Theory,” 2nd ed. Benjamin-Cummings, Menlo Park, CA.(1985).
Harris SE, Crighton DG, J. Fluid Mech., 266, 243 (1994)
Karimipour S, Pugsley T, Powder Technol., 205(1-3), 1 (2011)
Davidson JF, Harrison D, “Fluidized Particles,” Cambridge University Press, London(1963).
Mori S, Wen CY, AIChE J., 21, 109 (1975)
Merry JMD, AIChE J., 21, 507 (1975)
Knowlton T, Karri R, Cocco R, “PSRI Fluidization Seminar and Workshop,” Particulate Solid Research Inc.(2011).
Rudisuli M, Schildhauer TJ, Biollaz SMA, van Ommen JR, Ind. Eng. Chem. Res., 51(12), 4748 (2012)
Jin Y, Wei F, Wang Y, “Effect of Internal Tube and Baffles,” Handbook of Fluidization and Fluid-Particle Systems, Ed. By Yang WC, Marcel Dekker, New York(2003).
Zheng CG, Tung YK, Xia YS, Hun B, Kwauk M, Fluidization, 91, 168 (1991)
Zheng CG, Tung YK, Li HZ, Kwauk M, Fluidization VII, 275 (1992)
Zhu JX, Salah M, Zhou YM, J. Chem. Eng. Jpn., 30(5), 928 (1997)
Snider DM, J. Comput. Phys., 170, 523 (2001)
Zhong WQ, Yu AB, Zhou GW, Xie J, Zhang H, Chem. Eng. Sci., 140, 16 (2016)
Lim JH, Shin JH, Bae K, Kim JH, Lee DH, Han JH, Lee DH, Korean J. Chem. Eng., 32(9), 1938 (2015)
Lim JH, Lee Y, Shin JH, Bae K, Han JH, Lee DH, Powder Technol., 266, 312 (2014)
Wen CY, Yu YH, Chem. Eng. Prog. Symp., 62, 100 (1966)
Ergun S, Chem. Eng. Prog., 48, 89 (1952)
Gidaspow D, “Multiphase Flow and Fluidization Continuum and Kinetic Theory Description,” Academic Press, Boston(1994).
Baldwin BS, Lomax H, “Thin Layer Approximation and Algebraic Model for Separated Turbulent Flows,” 16th Aerospace Sciences Meeting. doi:10.2514/6.1978-257(1978).
Karimipour S, Pugsley T, Powder Technol., 220, 63 (2012)
Lim JH, Bae K, Shin JH, Kim JH, Lee DH, Han JH, Lee DH, Powder Technol., 288, 315 (2016)
Andrews MJ, Orourke PJ, Int. J. Multiph. Flow, 22(2), 379 (1996)
O'Rourke PJ, Zhao P, Snider D, Chem. Eng. Sci., 64(8), 1784 (2009)
Batchelor GK, J. Fluid Mech., 193, 75 (1988)
Williams FA, “Combustion Theory,” 2nd ed. Benjamin-Cummings, Menlo Park, CA.(1985).
Harris SE, Crighton DG, J. Fluid Mech., 266, 243 (1994)
Karimipour S, Pugsley T, Powder Technol., 205(1-3), 1 (2011)
Davidson JF, Harrison D, “Fluidized Particles,” Cambridge University Press, London(1963).
Mori S, Wen CY, AIChE J., 21, 109 (1975)
Merry JMD, AIChE J., 21, 507 (1975)
Knowlton T, Karri R, Cocco R, “PSRI Fluidization Seminar and Workshop,” Particulate Solid Research Inc.(2011).
Rudisuli M, Schildhauer TJ, Biollaz SMA, van Ommen JR, Ind. Eng. Chem. Res., 51(12), 4748 (2012)
Jin Y, Wei F, Wang Y, “Effect of Internal Tube and Baffles,” Handbook of Fluidization and Fluid-Particle Systems, Ed. By Yang WC, Marcel Dekker, New York(2003).
