ISSN: 0304-128X ISSN: 2233-9558
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
korean
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received May 26, 2017
Accepted July 28, 2017
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Carbon Nano Tubes에 의한 난분해성 염료 Eosin Y의 흡착 특성

Adsorption Characteristics of Non-degradable Eosin Y Dye by Carbon Nano Tubes

부경대학교 화학공학과, 48547 부산광역시 남구 신선로 365 1대구대학교 생명공학과, 38453 경상북도 경산시 진량읍 대구대로 201 2울산과학대학교 환경화학공업과, 44610 울산광역시 남구 대학로 57
Department of Chemical Engineering, Pukyoung National University, 365, Sinseon-ro, Nam-gu, Busan, 48547, Korea 1Department of Biotechnology, Daegu University, 201, Daegu-daero, Jinryang-eup, Kyungsan, Gyeongbuk, 38453, Korea 2Department of Environmental & Chemical Industry, Ulsan College, 57, Daehak-ro, Nam-gu, Ulsan, 44610, Korea
josuh@uc.ac.kr
Korean Chemical Engineering Research, December 2017, 55(6), 771-777(7), 10.9713/kcer.2017.55.6.771 Epub 5 December 2017
downloadDownload PDF

Abstract

Carbon nano tubes (CNTs)를 흡착제로 사용하여 회분식 실험을 통해 염료 Eosin Y의 흡착특성을 조사하였다. 본 연구에 사용된 CNTs는 비표면적이 106.9 m2/g, 기공부피는 1.806 cm3/g, 기공직경은 163.2 A이었다. CNTs를 이용한Eosin Y의 흡착실험은 흡착시간, 초기 pH (2~10), 염료 농도(100, 150 및 200 mg/L), 흡착제의 양(0.05~1.0 g)과 온도(293, 313 및 333 K)를 변수로 사용하여 수행하였다. 흡착은 pH와 온도가 낮을수록 잘 이루어졌으며, Langmuir 모델식에 잘 적용되었다. 또한 흡착반응은 유사 2차 속도식에 잘 적용되었으며, 온도가 증가함에 따라 흡착량이 감소하였다. 입자 내 확산 모델 결과는 흡착 과정에서 막확산과 입자확산이 동시에 일어나는 것을 시사해 주었다. 열역학적 해 석에 의하면 CNTs에 의한 염료 Eosin Y의 흡착은 자발적이고 흡열특성을 보였다.
Adsorption characteristics of Eosin Y dye by carbon nano tubes (CNTs) were examined through batch experiments. CNTs used in the study had specific surface area of 106.9 m2/g, porosity volume of 1.806 cm3/g, and porosity diameter of 163.2 A, respectively. Adsorption experiments were carried out as function of contact time, initial solution pH (2~10), dye concentration (100, 150 and 200 mg/L), adsorbent dose (0.05~1.0 g) and temperature (293, 313 and 333 K). The adsorption was favoured at lower pHs and temperatures. Adsorption data were well described by the Langmuir model. The adsorption process followed the pseudo-second order kinetic model. The adsorption capacity decreased with increase in temperature. The results of the intraparticle diffusion model suggested that film diffusion and particle diffusion were simultaneously occured during the adsorption process. Thermodynamic studies suggested the spontaneous and endothermic nature of adsorption of Eosin Y dye onto CNTs.

References

Cassano A, Molinari R, Romano M, Drioli E, J. Membr. Sci., 181(1), 111 (2001)
Tunay O, Kabdasli I, Eremektar G, Orhon D, Water Sci. Technol., 34(11), 9 (1996)
Mittal A, Mittal J, Malviya A, Kaur D, Gupta VK, J. Colloid Interface Sci., 343(2), 463 (2010)
Wang S, Boyjoo Y, Choueib A, Zhu H, Water Res., 39(1), 129 (2005)
Budavari S, “The Merck Index,” Ed. 12 Merck and Co., Inc., White house station, N.J., USA. 1996.
Ciardelli G, Corsi L, Marucci M, Resour. Conserv. Recycl., 31, 189 (2000)
Gupta VK, Suhas, J. Environ. Manage., 90(8), 2313 (2009)
Koch M, Yediler A, Lienert D, Insel G, Kettrup A, Chemosphere, 46(1), 109 (2002)
Malik PK, Saha SK, Sep. Purif. Technol., 31(3), 241 (2003)
Choy KKH, Porter JF, Mckay G, J. Chem. Eng., 45(4), 575 (2000)
Namasivayam C, Muniasamy N, Gayatri K, Rani M, Ranganathan K, Bioresour. Technol., 57(1), 37 (1996)
Chatterjee S, Chatterjee S, Chatterjee BP, Das AR, Guha AK, J. Colloid Interface Sci., 288(1), 30 (2005)
Lee MG, Kam SK, Suh KH, J. Environ. Sci. Int., 21(5), 623 (2012)
Njoku VO, Foo KY, Asif M, Hameed BH, Chem. Eng. J., 250, 198 (2014)
Porkodi K, Kumar KV, J. Hazard. Mater., 143(1-2), 311 (2007)
Purkait MK, DasGupta S, De S, J. Environ. Manage., 76(2), 135 (2005)
Wu CH, J. Hazard. Mater., 144(1-2), 93 (2007)
Shirmardi M, Mesdaghinia A, Mahvi AH, Nasseri S, Nabizadeh R, Chem EJ, Hindawi J. Chem., 9(4), 2371 (2012)
Yao YJ, Xu FF, Chen M, Xu ZX, Zhu ZW, Bioresour. Technol., 101(9), 3040 (2010)
Rodriguez A, Ovejero G, Sotelo JL, Mestanza M, Garcia J, Environ J, Sci. Health Part A, 45(12), 1642 (2010)
Gupta VK, Agarwal S, Saleh TA, Water Res., 45(6), 2207 (2011)
Ren XM, Chen CL, Nagatsu M, Wang XK, Chem. Eng. J., 170(2-3), 395 (2011)
Bhattacharyya KG, Sharma A, Dyes Pigment., 65(1), 51 (2005)
Machado FM, Bergmann CP, Lima EC, Adebayo MA, Fagan SB, Mater. Res., 17(1), 153 (2014)
Ai LH, Zhang CY, Liao F, Wang Y, Li M, Meng LY, Jiang J, J. Hazard. Mater., 198, 282 (2011)
Lee CH, Park JM, Lee MG, J. Environ. Sci. Int., 24(2), 151 (2015)
Lagergren S, Kunglia Svenska Vetenskapsa-kademiens Handlingar, 24(4), 1-39(1898).
Ho YS, McKay G, Can. J. Chem. Eng., 76(4), 822 (1998)
Weber WJ, Morris JC, J. Sanitary Eng. Div. Am. Soc. Civ. Eng., 89(2), 31 (1963)
Kannan K, Sundaram MM, Dyes Pigment., 51(1), 25 (2001)
Huang XY, Bin JP, Bu HT, Jiang GB, Zeng MH, Carbohydr. Polym., 84(2), 1350 (2011)
Langmuir I, J. Am. Chem. Soc., 40(9), 1361 (1918)
Freundlich HMF, J. Phys. Chem., 57, 385 (1906)
Madrakian T, Afkhami A, Ahmadi M, Bagheri H, J. Hazard. Mater., 196, 109 (2011)
Chatterjee S, Chatterjee S, Chatterjee BP, Guha AK, Colloids Surf. A: Physicochem. Eng. Asp., 299(1-3), 146 (2007)
Sekar M, Sakthi V, Rengaraj S, J. Colloid Interface Sci., 279(2), 307 (2004)
Senthilkumaar S, Kalaamani P, Subburaam CV, J. Hazard. Mater., 136(3), 800 (2006)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
Phone No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Chemical Engineering Research 상단으로