ISSN: 0304-128X ISSN: 2233-9558
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
korean
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received November 8, 2017
Accepted December 15, 2017
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

제조방법에 따른 TiO2의 광촉매 특성 분석

Photocatalytic Properties of TiO2 According to Manufacturing Method

동국대학교 화공생물공학과, 04620 서울특별시 중구 필동로 1길30
Department of Chemical and Biochemical Engineering, Dongguk University, Pildong-ro 1-gil, Jung-gu, Seoul, 04620, Korea
pjhoon@dongguk.edu
Korean Chemical Engineering Research, April 2018, 56(2), 156-161(6), 10.9713/kcer.2018.56.2.156 Epub 5 April 2018
downloadDownload PDF

Abstract

염소법과 졸-겔법으로 TiO2 광촉매 분말을 제조하였다. 제조방법 및 조건에 따라 촉매의 결정상 형태(아나타제와 루타일)와 비표면적이 변화하는 것을 알 수 있었다. TTIP-sol로 제조한 광촉매가 염소법이나 TBOT-sol로 제조한 광촉매에 비해 methylene blue (MB) 분해 특성이 더 높았으며, 수용액상의 90% 이상의 MB를 제거할 수 있었다. 실험 결과를 통해 TiO2 광촉매는 단일 아나타제상와 큰 비표면적을 가지면 유기물 분해 특성을 향상될 수 있는 것을 확인하였다.
TiO2 photocatalyst powders were prepared by chlorination method and sol-gel method. Specific surface area and crystalline (i.e., anatase and rutile) of the catalyst varied depending on manufacture conditions and method. TTIP-sol photocatalyst had higher methylene blue (MB) decomposition characteristics than photocatalyst from chlorination method and TBOT-sol. MB removal efficiency from aqueous solution with TTIP-sol photocatalyst was over 90%. Experimental results showed that the TiO2 photocatalyst with a single anatase phase and a large specific surface area had high decomposition characteristics of organic materials.

References

Pyo SH, Kim MJ, Lee SC, Yoo CK, Korean Chem. Eng. Res., 52(4), 503 (2014)
Andreozzi R, Caprio V, Insola A, Marotta R, Catalysis Today, 53(1), 51 (1999)
Fukahori S, Ichiura H, Kitaoka T, Tanaka H, Enviro. Sci. Technol., 37, 1048 (2003)
Jihoon J, Theor. Appl. Chem. Eng., 12, 1427 (2006)
Kim Y, Bai BC, Lee YS, Appl. Chem. Eng., 23(3), 308 (2012)
Athanasekou CP, Moustakas NG, Morales-Torres S, Pastrana-Martinez LM, Figueiredob JL, Faria JL, Silva AMT, Dona-Rodriguez JM, Romanos GEM, Falaras P, Appl. Catal. B: Environ., 178, 12 (2015)
Jia J, Li D, Wan J, Yu X, J. Ind. Eng. Chem., 33, 162 (2016)
Vautier M, Guillard C, Herrmann JM, J. Catal., 201(1), 46 (2001)
Cheon MS, Yang OB, Chung HH, Back SK, Appl. Chem., 4(1), 149 (2000)
Yu W, Yuan S, Li Y, Zhang Q, Wang H, Mater. Res. Bull., 36, 1957 (2001)
Bacsa RR, Gratzel M, J. Am. Ceram. Soc., 79, 2185 (1996)
Kim DS, Han SJ, Kwak SY, J. Colloid Interface Sci., 316(1), 85 (2007)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
Phone No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Chemical Engineering Research 상단으로