ISSN: 0304-128X ISSN: 2233-9558
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
korean
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 4, 2019
Accepted April 10, 2019
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Ag 담지된 LaSrCoFeO3 섬유상 perovskite 촉매의 탄소 입자상 물질의 산화반응

Ag-Loaded LaSrCoFeO3 Perovskite Nano-Fibrous Web for Effective Soot Oxidation

한국생산기술연구원 청정생산시스템연구소 지능형청정소재 그룹, 31056 충청남도 천안시 서북구 입장면 양대기로길 89 1School of Chemistry University of St Andrews, Fife, KY16 9ST, United Kingdom 2연세대학교 화공생명공학과, 03722 서울시 서대문구 연세로 50
Research Institute of Sustainable Manufacturing System, Intelligent Sustainable Materials R&D Group, Korea Institute of Industrial Technology, 89, Yangdaegiro-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do, 31056, Korea 1School of Chemistry, University of St Andrews, Fife, KY16 9ST, United Kingdom, UK 2Department of Chemical and Biomolecular Engineering, Yonsei University, 50, Yonsei-ro, Seodaemun-gu, Seoul, 03722, Korea
clee@kitech.re.kr
Korean Chemical Engineering Research, August 2019, 57(4), 584-588(5), 10.9713/kcer.2019.57.4.584 Epub 2 August 2019
downloadDownload PDF

Abstract

디젤엔진 시스템은 미세먼지 배출의 엄격해진 저감/제어 기준을 충족하기 위해서 산화촉매는 매우 중요한 기술 중에 하나이다. 본 연구에서는 효율적인 soot산화의 촉매로 Ag 나노입자가 loading된 La0.6Sr0.4Co0.2Fe0.8O3 섬유상 web 촉 매를 제시하였다. 제조된 촉매는 FE-SEM, EDS mapping, XRD, XPS 분석을 통해 특성을 평가하였다. Soot 산화성능 측정결과 Ag의 효율적인 촉매특성과 증가된 soot입자와 표면의 접촉면적으로 인하여 50% 산화온도 평가(T50= 490 °C) 에서 자연적인 산화보다 151 °C 가속화된 것을 확인하였다. 따라서 Ag가 loading된 촉매와 3차원적인 web 구조는 soot 산화에 효율적인 촉매후보군으로 확인하였다.
The catalytic combustion of particulate matter (PM) is one of the key technologies to meet emission standards of diesel engine system. Therefore, we herein suggest Ag loaded La0.6Sr0.4Co0.2Fe0.8O3 perovskite web catalyst. They were produced by the electrospinning method. FE-SEM, EDS mapping, XRD, XPS were studied to investigate the crystal and morphological structures of loaded Ag particles and La0.6Sr0.4Co0.2Fe0.8O3 perovskite web catalyst. Following the catalytic soot oxidation, we found that the Ag loaded La0.6Sr0.4Co0.2Fe0.8O3 perovskite web catalyst showed the higher catalytic activities (e.g., T50 = 490 °C) than the only La0.6Sr0.4Co0.2Fe0.8O3 perovskite web catalyst (e.g., T50 = 586 °C). Thus, this finding suggests that Ag loaded La0.6Sr0.4Co0.2Fe0.8O3 perovskite web catalyst can be a promising candidate for enhancing the soot oxidation.

References

Dockery DW, Ann Epidemiol, 19(4), 257 (2009)
Koltsakis GC, Stamatelos AM, Prog. Energy Combust. Sci., 23(1), 1 (1997)
Gorsmann C, Monatsh. Chem. Chem. Mon., 136(1), 91 (2005)
Dwyer H, Ayala A, Zhang S, Collins J, Huai T, Herner J, Chau W, J. Aerosol Sci., 41(6), 541 (2010)
Krishna K, Bueno-Lopez A, Makkee M, Moulijn JA, Appl. Catal. B: Environ., 75(3-4), 189 (2007)
Castoldi L, Matarrese R, Lietti L, Forzatti P, Appl. Catal. B: Environ., 90(1-2), 278 (2009)
Xue L, Zhang CB, He H, Teraoka Y, Appl. Catal. B: Environ., 75(3-4), 167 (2007)
Shimokawa H, Kusaba H, Einaga H, Teraoka Y, Catal. Today, 139(1-2), 8 (2008)
Li Z, Meng M, Zha Y, Dai Y, Hu T, Xie Y, Zhang J, Appl. Catal. B: Environ., 121-122(13), 65 (2012)
Pena MA, Fierro JLG, Chem. Rev., 101(7), 1981 (2001)
Stanmore BR, Brilhac JF, Gilot P, Carbon, 39, 2247 (2001)
Villani K, Kirschhock CEA, Liang D, Tendeloo GV, Martens JA, Angew. Chem.-Int. Edit., 45, 3106 (2006)
Zhang G, Zhao Z, Liu J, Jiang G, Duan A, Zheng J, Chen S, Zhou R, Chem. Commun., 46(3), 457 (2010)
Aneggi E, Wiater D, de Leitenburg C, Llorca J, Trovarelli A, ACS Catal., 4(1), 172 (2014)
Miceli P, Bensaid S, Russo N, Fino D, Nanoscale Res. Lett., 9, 254 (2014)
Lee C, Park JI, Shul YG, Einaga H, Teraoka Y, Appl. Catal. B: Environ., 174-175, 185 (2015)
Lee C, Jeon Y, Hata S, Park JI, Akiyoshi R, Saito H, Teraoka Y, Shul YG, Einaga H, Appl. Catal. B: Environ., 191, 157 (2016)
Lee C, Jeon Y, Kim T, Tou A, Park JI, Einaga H, Shul YG, Fuel, 212, 395 (2018)
Waller D, Lane JA, Kilner JA, Steele BCH, Mater. Lett., 27(4-5), 225 (1996)
Fadley CS, Shirley DA, J. Res. Natl. Bur. Stand. Sect. A: Phys. Chem. A, 74A(4), 543 (1970)
Gunawan C, Teoh WY, Marquis CP, Lifia J, Amal R, Small, 5(3), 341 (2009)
Qu ZP, Cheng MJ, Dong XL, Bao XH, Catal. Today, 93-95, 247 (2004)
Machida M, Murata Y, Kishikawa K, Zhang D, Ikeue K, Chem. Mater., 20, 4489 (2008)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
Phone No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Chemical Engineering Research 상단으로