Articles & Issues
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
충전물의 젖은 면적의 측정법
The Determination of Wetted Area of Packing Materials
HWAHAK KONGHAK, June 1970, 8(2), 67-71(5), NONE
Download PDF
Abstract
The present work was undertaken for the purpose of observing wetted area of packing materials in the packed columns. Studies were made on two kinds of Raschig rings by using a dyestuff.
The schematic diagram of experimental apparatus is shown in Fig. 1-A and the specifications of Raschig rings are listed in Table 1.
The gas rate and viscosity of the liquid has no significant on wetted area.
The effects of liquid rate and surface tension of the liquid used are as follows ;
aw / at = k'L1/3 σm
k'=0.824 m=-0.96 for 17-mm rings
k'=0.368 m=-0.65 for 27-mm rings
The values of aw/at varied with the packing height to the -0.05 power for all packing materials.
The schematic diagram of experimental apparatus is shown in Fig. 1-A and the specifications of Raschig rings are listed in Table 1.
The gas rate and viscosity of the liquid has no significant on wetted area.
The effects of liquid rate and surface tension of the liquid used are as follows ;
aw / at = k'L1/3 σm
k'=0.824 m=-0.96 for 17-mm rings
k'=0.368 m=-0.65 for 27-mm rings
The values of aw/at varied with the packing height to the -0.05 power for all packing materials.
