Overall
- Language
- english
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received July 15, 2024
Revised September 19, 2024
Accepted September 19, 2024
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
Most Cited
Effect of Water Vapor on Ozone-Induced Lean Methane Oxidation Using Cobalt-Exchanged BEA Catalysts
강원대학교 화학공학과
Department of Chemical Engineering, Kangwon National University
stayheavy@kangwon.ac.kr
Korean Chemical Engineering Research, November 2024, 62(4), 364-370(7), Epub 1 November 2024
Download PDF
Abstract
In response to the threats of global warming and climate change, the development of highly energy-efficient
lean methane oxidation processes has become crucial. One promising technology is ozone-induced lean methane oxidation
(O3-LMO), which utilizes ozone as an oxidant and a transition metal-loaded zeolite as a catalyst. Our previous study
demonstrated that the O3-LMO system, employing a cobalt-exchanged BEA (Co-BEA) catalyst, effectively abates lean
methane (500 ppm) at low temperatures below 200°C under dry conditions. In this study, we investigated the effect of
water vapors on the performance of Co-BEA-based O3-LMO system. The results indicated that CH4 conversion, CO2
selectivity, and O3 utilization efficiency of the system were not significantly affected by water vapors. Additionally, any
temporary suppression of activity could be easily reversed through simple vacuum drying of the catalyst. The system
maintained robust activity for over 18 hours during prolonged testing under wet conditions.
References
1. https://www.epa.gov/ghgemissions/understanding-global-warming-
potentials.
2. Jackson, R. B., Solomon, E. I., Canadell, J. G., Cargnello M. and
Field, C. B., “Methane Removal and Atmospheric Restoration,”
Nat. Sustain., 2(6), 436-438(2019).
3. Etminan, M., Myhre, G., Highwood, E. J. and Shine, K. P.,
“Radiative Forcing of Carbon Dioxide, Methane, and Nitrous
Oxide: A Significant Revision of the Methane Radiative Forcing,”
Geophys. Res. Lett., 43, 12614-12623(2016).
4. Jin, S. M., Lee, K.-Y. and Lee, D.-W., “Ozone-Induced Lean
Methane Oxidation over Cobalt Ion-Exchanged BEA Catalyst
under Dry Reaction Conditions,” J. Ind. Eng. Chem., 112, 296-
306(2022).
5. Lee, S. W., Kim, E. J., Lee H. J. and Park, J. H., “Preparation of
the Hollow Fiber Type Perovskite Catalyst for Methane Complete
Oxidation,” Korean Chem. Eng. Res., 56(3), 297-302(2018).
6. Kim, S., Lee, J. Y., Cho, I., Lee, D.-W. and Lee, K.-Y., “Catalytic
Combustion of Methane over AMnAl11O19(A=La, Sr, Ba)
and CeO2/LaMnAl11O19,” Korean Chem. Eng. Res., 49(5), 633-
638(2011).
7. Hui, K. S., Kwong, C. W. and Chao, C. Y. H., “Methane Emission
Abatement by Pd-ion-exchanged zeolite 13X with Ozone,”
Energy. Environ. Sci., 3, 1092-1098(2010).
8. Keenan, M., Nicole, J. and Poojary, D., “Ozone as an Enabler
for Low Temperature Methane Control over a Current Production
Fe-BEA Catalyst,” Top. Catal., 62, 351-355(2019).
9. Yasumura, S., Saita, K., Miyakage, T., Nagai, K., Kon, K., Toyao,
T., Maeno, Z., Taketsugu, T. and Shimizu, K., “Designing Maingroup
Catalysts for Low-temperature Methane Combustion by
Ozone,” Nat. Commun., 14, 3926:1-10(2023).
10. Beznis, N. V., Weckhuysen, B. M. and Bitter J. H., “Partial Oxidation
of Methane Over Co-ZSM-5: Tuning the Oxygenate
Selectivity by Altering the Preparation Route,” Catal. Lett., 136,
52-56(2010).
11. Torimoto, M., Ogo, S., Hisai, Y., Nakano, N., Takahashi, A.,
Ma, Q., Seo, J. G., Tsuneki, H., Norby, T. and Sekine, Y., “Support
Effects on Catalysis of Low Temperature Methane Steam
Reforming,” RSC Adv., 10, 26418-26424(2020).
12. Lott, P. and Deutschmann, O., “Lean-Burn Natural Gas Engines:
Challenges and Concepts for an Efficient Exhaust Gas Aftertreatment
System,” Emiss. Control Sci. Technol., 7, 1-6(2021).
13. Kinnunen, N., Kinnunen, T. and Kallinen, K., “Improved Sulfur
Resistance of Noble Metal Catalyst for Lean-Burn Natural Gas
Applications,” SAE Tech. Paper 2013-24-0155 (2013).
14. Ungary, C., “A Sustainable Approach to the Conversion of
Waste into Energy: Landfill Gas-to-Fuel Technology,” Sustainability,
15(20), 14782:1-17(2023).
15. Manheim, D. C., Yeşiller, N. J. and Hanson, L., “Gas Emissions
from Municipal Solid Waste Landfills: A Comprehensive Review
and Analysis of Global Data,” J. Indian Inst. Sci., 101, 625-657
(2021).
16. Feilberg, A., Hansen, M. J., Liu, D. and Nyord, T., “Contribution of
Livestock H2S to Total Sulfur Emissions in a Region with Intensive
Animal Production,” Nat. Commun., 1069, 1-7(2017).
17. Kumar, S. N., Appari, S. and Kuncharam B. V. R., “Techniques
for Overcoming Sulfur Poisoning of Catalyst Employed in Hydrocarbon
Reforming,” Catal. Surv. Asia, 25, 362-388(2021).
18. Luo, J., Xu, H., Liang, X., Wu, S., Liu, Z., Tie, Y., Li, M. and
Yang, D., “Research Progress on Selective Catalytic Reduction
of NOx by NH3 over Copper Zeolite Catalysts at Low Temperature:
Reaction Mechanism and Catalyst Deactivation,” Res. Chem.
Intermed., 49, 2321-2357(2023).
potentials.
2. Jackson, R. B., Solomon, E. I., Canadell, J. G., Cargnello M. and
Field, C. B., “Methane Removal and Atmospheric Restoration,”
Nat. Sustain., 2(6), 436-438(2019).
3. Etminan, M., Myhre, G., Highwood, E. J. and Shine, K. P.,
“Radiative Forcing of Carbon Dioxide, Methane, and Nitrous
Oxide: A Significant Revision of the Methane Radiative Forcing,”
Geophys. Res. Lett., 43, 12614-12623(2016).
4. Jin, S. M., Lee, K.-Y. and Lee, D.-W., “Ozone-Induced Lean
Methane Oxidation over Cobalt Ion-Exchanged BEA Catalyst
under Dry Reaction Conditions,” J. Ind. Eng. Chem., 112, 296-
306(2022).
5. Lee, S. W., Kim, E. J., Lee H. J. and Park, J. H., “Preparation of
the Hollow Fiber Type Perovskite Catalyst for Methane Complete
Oxidation,” Korean Chem. Eng. Res., 56(3), 297-302(2018).
6. Kim, S., Lee, J. Y., Cho, I., Lee, D.-W. and Lee, K.-Y., “Catalytic
Combustion of Methane over AMnAl11O19(A=La, Sr, Ba)
and CeO2/LaMnAl11O19,” Korean Chem. Eng. Res., 49(5), 633-
638(2011).
7. Hui, K. S., Kwong, C. W. and Chao, C. Y. H., “Methane Emission
Abatement by Pd-ion-exchanged zeolite 13X with Ozone,”
Energy. Environ. Sci., 3, 1092-1098(2010).
8. Keenan, M., Nicole, J. and Poojary, D., “Ozone as an Enabler
for Low Temperature Methane Control over a Current Production
Fe-BEA Catalyst,” Top. Catal., 62, 351-355(2019).
9. Yasumura, S., Saita, K., Miyakage, T., Nagai, K., Kon, K., Toyao,
T., Maeno, Z., Taketsugu, T. and Shimizu, K., “Designing Maingroup
Catalysts for Low-temperature Methane Combustion by
Ozone,” Nat. Commun., 14, 3926:1-10(2023).
10. Beznis, N. V., Weckhuysen, B. M. and Bitter J. H., “Partial Oxidation
of Methane Over Co-ZSM-5: Tuning the Oxygenate
Selectivity by Altering the Preparation Route,” Catal. Lett., 136,
52-56(2010).
11. Torimoto, M., Ogo, S., Hisai, Y., Nakano, N., Takahashi, A.,
Ma, Q., Seo, J. G., Tsuneki, H., Norby, T. and Sekine, Y., “Support
Effects on Catalysis of Low Temperature Methane Steam
Reforming,” RSC Adv., 10, 26418-26424(2020).
12. Lott, P. and Deutschmann, O., “Lean-Burn Natural Gas Engines:
Challenges and Concepts for an Efficient Exhaust Gas Aftertreatment
System,” Emiss. Control Sci. Technol., 7, 1-6(2021).
13. Kinnunen, N., Kinnunen, T. and Kallinen, K., “Improved Sulfur
Resistance of Noble Metal Catalyst for Lean-Burn Natural Gas
Applications,” SAE Tech. Paper 2013-24-0155 (2013).
14. Ungary, C., “A Sustainable Approach to the Conversion of
Waste into Energy: Landfill Gas-to-Fuel Technology,” Sustainability,
15(20), 14782:1-17(2023).
15. Manheim, D. C., Yeşiller, N. J. and Hanson, L., “Gas Emissions
from Municipal Solid Waste Landfills: A Comprehensive Review
and Analysis of Global Data,” J. Indian Inst. Sci., 101, 625-657
(2021).
16. Feilberg, A., Hansen, M. J., Liu, D. and Nyord, T., “Contribution of
Livestock H2S to Total Sulfur Emissions in a Region with Intensive
Animal Production,” Nat. Commun., 1069, 1-7(2017).
17. Kumar, S. N., Appari, S. and Kuncharam B. V. R., “Techniques
for Overcoming Sulfur Poisoning of Catalyst Employed in Hydrocarbon
Reforming,” Catal. Surv. Asia, 25, 362-388(2021).
18. Luo, J., Xu, H., Liang, X., Wu, S., Liu, Z., Tie, Y., Li, M. and
Yang, D., “Research Progress on Selective Catalytic Reduction
of NOx by NH3 over Copper Zeolite Catalysts at Low Temperature:
Reaction Mechanism and Catalyst Deactivation,” Res. Chem.
Intermed., 49, 2321-2357(2023).
