ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 6, 2022
Accepted April 10, 2022
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Decomposition characteristics of SF6 in an electrical tube furnace and a pilot system by combustion

Energy & Environment Laboratory, KEPCO Research Institute, 105 Munji-ro, Yuseong-gu, Daejeon 34056, Korea
joongwon.lee@kepco.co.kr
Korean Journal of Chemical Engineering, October 2022, 39(10), 2615-2622(8), 10.1007/s11814-022-1141-0
downloadDownload PDF

Abstract

Sulfur hexafluoride (SF6) is widely used in a variety of industrial processes and commercial products. However, this chemically stable gas is one of the most potent greenhouse gases (GHGs) contributing significantly to global warming. Therefore, to reduce greenhouse gas such as SF6, a new eco-friendly, economic, and stable treatment technology is required. In this study, the thermal decomposition characteristics of SF6 were investigated using a laboratory scale electrical tube furnace reactor and combustion-based pilot system. Based on these results, the SF6 decomposition reaction order is around 1 and its activation energy (Ea) in the investigation temperature range is 238.04-257.18 kJ/mol. This value is used to calculate the reactor size when designing a commercial facility. Also, the experimental results of a combustion-based pilot system indicate that SF6 supply location, reaction temperature, supplied concentration, and fuel/air ratio could affect SF6 decomposition efficiency. The results demonstrate that a 99.9% decomposition efficiency could be achieved in the combustion.

References

Zeng F, Tang J, Zhang X, IEEE Trans. Dielectr. Electr. Insul., 24, 367 (2015)
Han SH, Park HW, Kim TH, Park DW, Clean Technol., 17, 250 (2011)
Kim JB, Ryu JY, J. KSWM., 37, 546 (2020)
Van Brunt RJ, Herron JT, IEEE Trans. Dielectr. Electr. Insul., 25, 75 (1990)
Qin L, Han J, Wang G, Kim HJ, Kawaguchi I, Sci. Res. Conf. Environ. Pollut. Public Health, 126 (2010)
Diaz J, Casanovas AM, Casanovas J, J. Phys. D-Appl. Phys., 36, 1558 (2003)
Zeng F, Tang J, Xie Y, Zhou Q, Zhang C, Electr. Eng. Technol., 10, 1787 (2015)
Lyman JL, J. Chem. Phys., 67, 1868 (1977)
Tsang W, Herron J, J. Chem. Phys., 96, 4272 (1992)
Han HJ, Diss. master dissertation, Seoul National University of Technology, Seoul, Korea (2010).
Mi T, Han J, He X, Qin L, Environ. Sci. Technol., 41, 143 (2015)
Hayashi S, Minami W, Qguchi T, Kim HJ, Kagaku Kogaku Ronbunshu, 35, 252 (2009)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로