ISSN: 0304-128X ISSN: 2233-9558
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
korean
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received November 15, 2014
Accepted December 11, 2014
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

폼 형태의 다공성 탄화규소 지지체 표면 위에 ZSM-5 합성

Synthesis of ZSM-5 on the Surface of Foam Type Porous SiC Support

한국세라믹기술원, 153-801 서울 금천구 디지털로 10길 77 1(주)엔바이온, 305-501 대전 유성구 탑립동 841
Energy & Environmental Devision, Korea Institute of Ceramic Engineering and Technology, 77 Digital-ro 10 gil, Geumcheon-gu, Seoul 153-801, Korea 1Enbion Inc., 841 Tamnip-dong Yuseong-gu, Daejeon 305-501, Korea
wtkwon@kicet.re.kr
Korean Chemical Engineering Research, August 2015, 53(4), 425-430(6), 10.9713/kcer.2015.53.4.425 Epub 29 July 2015
downloadDownload PDF

Abstract

고분자 복제방법을 이용하여 제조한 폼 형태의 다공성 탄화규소 표면에 수열 합성 방법을 적용하여 ZSM-5를 합성하였다. 다공성 탄화규소 표면으로부터 ZSM-5가 합성될 수 있도록 유도하기 위하여 합성단계에 앞서 탄화규소 표면에 산화 층을 형성하였다. 수열합성 반응은 산화처리 된 다공성 탄화규소와 TEOS, Al(NO3).9H2O 및 TPAOH를 원료로 사용하여 150 oC에서 7시간 진행하였다. XRD 및 SEM 분석을 통하여 1~3 μm 크기의 ZSM-5가 다공성 탄화규소 표면에 코팅되어 성장하였음을 확인하였다. BET 분석결과 ZSM-5 합성 후에 10A이하의 미세기공이 급격히 증가하였으며, 비표면적이 0.83 m2/g에서 30.75 m2/g으로 급격히 증가되었음을 알 수 있었다.
ZSM-5 crystals grew by hydrothermal synthesis method on the surface of foam type porous silicon carbide ceramics which fabricated by polymer replica method. Oxide layer was developed on the surface of the porous silicon carbide ceramics to induce growth of ZSM-5 from the surface. In this study, hydrothermal synthesis was carried out for 7 h at 150 oC using TEOS, Al(NO3).9H2O and TPAOH as raw materials in the presence of the porous silicon carbide ceramics. X-ray Powder Diffraction (XRD) and Scanning Electron Microscope (SEM) analyses were confirmed 1~3 μm sized ZSM-5 crystals have grown on the surface of porous silicon carbide ceramics. BET data shows that small pores about 10A size drastically enhanced and surface area increased from 0.83 m2/g to 30.75 m2/g after ZSM-5 synthesis on the surface of foam type porous silicon carbide ceramics.

References

Jens W, Solid State Ion., 132, 175 (2000)
Rona J, Donahoe, Liou JG, Clay Clay Min., 32, 433 (1984)
van Donk S, Janssen AH, Bitter JH, de Jong KP, Catal. Rev.-Sci. Eng., 45(2), 297 (2003)
Kim HG, Yang YC, Jeong KE, Kim TW, Jeong SY, Kim CU, Jhung SH, Lee KY, Korean Chem. Eng. Res., 51(4), 418 (2013)
Moulijn JA, van Diepen AE, Kapteijn F, Appl. Catal. A: Gen., 212(1-2), 3 (2001)
Gayubo AG, Aguayo AT, Atutxa A, Prieto R, Bilbao J, Energy Fuels, 18(6), 1640 (2004)
Mortensen PM, Grunwaldt JD, Jensen PA, Knudsen KG, Jensen AD, Appl. Catal. A: Gen., 407(1-2), 1 (2011)
Sepulveda P, Am. Ceram. Soc. Bull., 76, 61 (1997)
Fukuura I, Asano T, “Fabrication and Properties of Some Oxide Ceramics: Alumina, Mullite and Zirconia,” 165-74 in Fine Ceramics, Edited by Saito S, Elsevier, New York(1985).
Zhu XW, Jiang DL, Tan SH, Zhang ZQ, J. Am. Ceram. Soc., 84(7), 1654 (2001)
Studart AR, Gonzenbach UT, Tervoort E, Gauckler LJ, J. Am. Ceram. Soc., 89(6), 1771 (2006)
Rauscher M, Selvam T, Schwieger W, Freude D, Microporous Mesoporous Mater., 75, 195 (2004)
Louis B, Ocampo F, Yun HS, Tessonnier JP, Pereira MM, Chem. Eng. J., 161(3), 397 (2010)
Eslava S, Iacopi F, Baklanov MR, Kirschhock CEA, Maex K, Martens JA, J. Am. Chem. Soc., 129(30), 9288 (2007)
Ledoux MJ, Pham-Huu C, Cattech, 5, 226 (2001)
Moene R, Makkee M, Moulijn JA, Appl. Catal. A: Gen., 167(2), 321 (1998)
Krawiec P, Kaskel S, J. Solid State Chem., 179, 2281 (2006)
Kwon WT, Kim SR, Kim Y, Lee YJ, Won J, Park WK, Oh SC, Mater. Sci. Forum, 724, 45 (2012)
Won JY, Kim SR, Kim Y, Shin DG, Lee YJ, Kwon WT, J. Environ. Therm. Eng., 11, 6 (2014)
Leroi P, Madani E, Pham-Huu C, Ledoux MJ, Savin-Poncet S, Bousquet JL, Catal. Today, 91-92, 53 (2004)
Wine G, Ledox MJ, Pham-Huu C, Top. Catal., 45, 111 (2007)
Seijger GBF, Oudshoorn OL, Van Kooten WEJ, Jansen JC, Van Bekkum H, Van Den Bleek CM, Calis HPA, Microporous Mesoporous Mater., 39, 195 (2000)
Jiao Y, Jiang C, Yang Z, Zhang J, Microporous Mesoporous Mater., 162, 152 (2012)
Losch P, Boltz M, Soukup K, Song IH, Yun HS, Louis B, Microporous Mesoporous Mater., 188, 99 (2014)
Inova S, Louis B, Madani B, Tessonnier JP, Ledoux MJ, Pham-Huu C, J. Phys. Chem. C, 111, 4368 (2007)
Katsuki H, Furuta S, Komarneni S, J. Am. Ceram. Soc., 83(5), 1093 (2000)
First EL, Gounaris CE, Wei J, Floudas CA, Phys. Chem. Chem. Phys., 13, 17339 (2011)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
Phone No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Chemical Engineering Research 상단으로