Download PDF

2. The solids concentration distribution in the deep cone thickener: A pilot scale test

Huazhe Jiao^{1 2} Aixiang Wu² Hongjiang Wang^2† Shuiping Zhong¹ Renman Ruan¹ ShengHua Yin²

Korean Journal of Chemical Engineering, February 2013, 30(2), 262-268(7), 10.1007/s11814-012-0211-0

Download PDF

3. A quasi-sequential parameter estimation for nonlinear dynamic systems based on multiple data profiles

Chao Zhao Quoc Dong Vu¹ Pu Li^1†

Korean Journal of Chemical Engineering, February 2013, 30(2), 269-277(9), 10.1007/s11814-012-0158-1

Download PDF

4. Developing a heuristics for glass cutting process optimization: A case of two-dimensional two-stage guillotine cutting with multiple stock sizes

Kyung Tae Park Jun-Hyung Ryu^1† Ho-Kyung Lee² In-Beum Lee

Korean Journal of Chemical Engineering, February 2013, 30(2), 278-285(8), 10.1007/s11814-012-0125-x

Download PDF

5. Design and optimization of heat integrated dividing wall columns for improved debutanizing and deisobutanizing fractionation of NGL

Nguyen Van Duc Long Moon Yong Lee^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 286-294(9), 10.1007/s11814-012-0149-2

Download PDF

6. Experimental investigation and stability analysis on dense-phase pneumatic conveying of coal and biomass at high pressure

Liang Cai^† Cai Jiaying Xu Guiling Xu Pan Chen Xiaoping Zhao Changsui

Korean Journal of Chemical Engineering, February 2013, 30(2), 295-305(11), 10.1007/s11814-012-0165-2

Download PDF

7. Selective hydrogenation of 4-isobutylacetophenone over a sodium-promoted Pd/C catalyst

Hong-Baek Cho Bae Uk Lee¹ Chung-Han Ryu² Tadachika Nakayama Yeung-Ho Park^1†

Korean Journal of Chemical Engineering, February 2013, 30(2), 306-313(8), 10.1007/s11814-012-0184-z

Download PDF

8. A novel [Bmim]PW/HMS catalyst with high catalytic performance for the oxidative desulfurization process

Ling Tang Guangqing Luo Lihua Kang Mingyuan Zhu^† Bin Dai

Korean Journal of Chemical Engineering, February 2013, 30(2), 314-320(7), 10.1007/s11814-012-0182-1

Download PDF

9. Synthesis gas and char production from Mongolian coals in the continuous devolatilization process

Jong-Soo Bae^{1 2} Dong-Wook Lee¹ Se-Joon Park¹ Young-Joo Lee¹ Jai-Chang Hong¹ Choon Han² Young-Chan Choi^1†

Korean Journal of Chemical Engineering, February 2013, 30(2), 321-326(6), 10.1007/s11814-012-0153-6

Download PDF

10. Epoxidation of waste used-oil biodiesel: Effect of reaction factors and its impact on the oxidative stability

Chainarong Kongyai¹ Benjapon Chalermsinsuwan^{1 2} Mali Hunsom^{1 2†}

Korean Journal of Chemical Engineering, February 2013, 30(2), 327-336(10), 10.1007/s11814-012-0159-0

Download PDF

11. Experimental study on interaction and excess heat release under oxy-fuel combustion of blended coals

Yonmo Sung Cheoreon Moon Seongyool Ahn Gyungmin Choi^1† Duckjool Kim¹

Korean Journal of Chemical Engineering, February 2013, 30(2), 337-344(8), 10.1007/s11814-012-0160-7

Download PDF

12. Effect of soil organic carbon on sorption and desorption of perchloroethylene in soils

Youn-Goog Lee¹ Jeong-Hun Park^{2 3†}

Korean Journal of Chemical Engineering, February 2013, 30(2), 345-350(6), 10.1007/s11814-012-0222-x

Download PDF

13. Removal characteristics and distribution of indoor tobacco smoke particles using a room air cleaner

Sunghak Jung Youngchull Ahn^1† Yoochul Lee² Jaekeun Lee³

Korean Journal of Chemical Engineering, February 2013, 30(2), 351-356(6), 10.1007/s11814-012-0151-8

Download PDF

14. Synthesis of a novel carbon nanofiber structure for removal of lead

Hossein Faghihian^† Masoume Kooravand¹ Homa Atarodi

Korean Journal of Chemical Engineering, February 2013, 30(2), 357-363(7), 10.1007/s11814-012-0152-7

Download PDF

15. Effect of agglomeration of silver nanoparticle on nanotoxicity depression

Eunjoo Bae Byung-Cheun Lee¹ Younghun Kim² Kyunghee Choi¹ Jongheop Yi^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 364-368(5), 10.1007/s11814-012-0155-4

Download PDF

16. Batch and continuous (fixed-bed column) biosorption of Cu(II) by Tamarindus indica fruit shell

Shamik Chowdhury^† Papita Das Saha

Korean Journal of Chemical Engineering, February 2013, 30(2), 369-378(10), 10.1007/s11814-012-0127-8

Download PDF

17. Effect of supplying a carbon extracting solution on denitrification in horizontal subsurface flow constructed wetlands

Yi Ding¹ Xinshan Song¹ Yuhui Wang¹ Denghua Yan^{1 2†}

Korean Journal of Chemical Engineering, February 2013, 30(2), 379-384(6), 10.1007/s11814-012-0139-4

Download PDF

18. Neural network prediction of fluidized bed bioreactor performance for sulfide oxidation

Varsha Midha^† Mithilesh Kumar Jha Apurba Dey¹

Korean Journal of Chemical Engineering, February 2013, 30(2), 385-391(7), 10.1007/s11814-012-0128-7

Download PDF

19. Recovery of nickel from chromite overburden, Sukinda using Aspergillus niger supplemented with manganese

Sunil Kumar Behera Prangya Parimita Panda Sandeep Kumar Saini¹ Nilotpala Pradhan Lala Behari Sukla^† Barada Kanta Mishra

Korean Journal of Chemical Engineering, February 2013, 30(2), 392-399(8), 10.1007/s11814-012-0142-9

Download PDF

20. Aqueous processing of nickel spent catalyst for a value added product

Abdul Rauf Sheik^† Malay Kumar Ghosh Kali Sanjay Tondepu Subbaiah Barada Kanta Mishra Abdullahi Aalafara Baba¹

Korean Journal of Chemical Engineering, February 2013, 30(2), 400-404(5), 10.1007/s11814-012-0143-8

Download PDF

21. Lipase from Penicillium camembertii KCCM 11268: Optimization of solid state fermentation and application to biodiesel production

Waraporn Malilas^{1 2} Seong Woo Kang¹ Sung Bong Kim¹ Hah Young Yoo¹ Warawut Chulalaksananukul² Seung Wook Kim^1†

Korean Journal of Chemical Engineering, February 2013, 30(2), 405-412(8), 10.1007/s11814-012-0132-y

Download PDF

22. Isolation and characterization of autoflocculating mutants of cyanobacterium Arthrospira platensis

Young-Hwa Kim¹ Hyun-Jin Park² Sang-Hoon Lee³ Jae-Hwa Lee^{1 2†}

Korean Journal of Chemical Engineering, February 2013, 30(2), 413-416(4), 10.1007/s11814-012-0146-5

Download PDF

23. A new flow path design for multidimensional protein identification technology using nano-liquid chromatography electrospray ionization mass spectrometry

Thangamani Rajesh¹ Hyung-Yeon Park² Eunjung Song³ Changmin Sung^{3 4} Sung-Hee Park^{3 4} Jae-Hun Lee^{3 4} Dongwon Yoo^{3 5} Yun-Gon Kim⁶ Jong-Min Jeon¹ Byung-Gee Kim^{3 4} Yung-Hun Yang^1†

Korean Journal of Chemical Engineering, February 2013, 30(2), 417-421(5), 10.1007/s11814-012-0134-9

Download PDF

24. Preparation of nylon-6/chitosan composites by nanospider technology and their use as candidate for antibacterial agents

Salem Slayyem Al-Deyab¹ Mohamed Hassan El-Newehy^{1 2†} Rajkumar Nirmala³ Ahmed Abdel-Megeed^{4 5} Hak Yong Kim^{1 3}

Korean Journal of Chemical Engineering, February 2013, 30(2), 422-428(7), 10.1007/s11814-012-0154-5

Download PDF

25. Inhibition effect of CO2 on asphaltene precipitation for an Iranian crude oil and comparison with N2 and CH4

Mohsen Mohammadi^{1 2} Mahdi Akbari¹ Alireza Bahramian^{1 3†} Mahdi Sadeghi Naeeni³ Zahra Fakhroueian³

Korean Journal of Chemical Engineering, February 2013, 30(2), 429-433(5), 10.1007/s11814-012-0144-7

Download PDF

26. Isothermal vapor-liquid equilibria for the binary systems of ethylene glycol monopropyl ether with 2,2-dimethylbutane and 2,3-dimethylbutane

Seonghoon Hyeong Sunghyun Jang Kab-Soo Lee¹ Hwayong Kim^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 434-439(6), 10.1007/s11814-012-0129-6

Download PDF

27. Kinetic and thermodynamic study of Eu(III) sorption on natural red earth in South China

Tao Yu^† Wang-Suo Wu¹ Zhi-Rong Liu Si-Wei Zhang Zheng-Wei Nie

Korean Journal of Chemical Engineering, February 2013, 30(2), 440-447(8), 10.1007/s11814-012-0130-0

Download PDF

28. Adsorption ability of oxidized multiwalled carbon nanotubes towards aqueous Ce(III) and Sm(III)

Fattaneh Naderi Behdani Alireza Talebizadeh Rafsanjani^† Meisam Torab-Mostaedi¹ Seyed Mohammad Amin Koochaki Mohammadpour

Korean Journal of Chemical Engineering, February 2013, 30(2), 448-455(8), 10.1007/s11814-012-0126-9

Download PDF

29. Influence of particle distribution on filter coefficient in the initial stage of filtration

Xing Min^† Longcang Shu Wei Li¹ Emmanuel Kwame Appiah-Adjei

Korean Journal of Chemical Engineering, February 2013, 30(2), 456-464(9), 10.1007/s11814-012-0141-x

Download PDF

30. Structural modeling of petroleum fractions based on mixture viscosity and Watson K factor

Abbas Mohammadi Mohammadreza Omidkhah^† Ramin Karimzadeh Ali Haghtalab

Korean Journal of Chemical Engineering, February 2013, 30(2), 465-473(9), 10.1007/s11814-012-0156-3

Download PDF

31. Solubility of carbon dioxide in ammonium-based ionic liquids: Butyltrimethylammonium bis(trifluoromethylsulfonyl)imide and methyltrioctylammonium bis(trifluoromethylsulfonyl)imide

Sang Gyu Nam Byung-Chul Lee^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 474-481(8), 10.1007/s11814-012-0178-x

Download PDF

32. Surface plasmon resonance study of (positive, neutral, negative) vesicles rupture by AgNPs’ attack for screening of cytotoxicity induced by nanoparticles

Ha Nee Umh Younghun Kim^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 482-487(6), 10.1007/s11814-012-0131-z

Download PDF

33. Synthesis and characterization of waterborne polyurethane acrylate copolymers

Misbah Sultan Haq Nawaz Bhatti^† Mohammad Zuber¹ Mehdi Barikani²

Korean Journal of Chemical Engineering, February 2013, 30(2), 488-493(6), 10.1007/s11814-012-0148-3

Download PDF

34. Substitution effect of silica by silane-modified titania on the tensile and dynamic properties of silica-filled SBR compounds

Young Woo Lim Jong-Ho Kim Gon Seo^†

Korean Journal of Chemical Engineering, February 2013, 30(2), 494-500(7), 10.1007/s11814-012-0138-5

Download PDF

35. A model for estimating agglomerate sizes of non-magnetic nanoparticles in magnetic fluidized beds

Li Zhou^{1 2} Feng Zhang¹ Tao Zhou^1† Hiroyuki Kage³ Yoshihide Mawatari³

Korean Journal of Chemical Engineering, February 2013, 30(2), 501-507(7), 10.1007/s11814-012-0170-5

Download PDF

Articles & Issues

Vol.30 No.2 February, 2013

1. Waste paper sludge as a potential biomass for bio-ethanol production

2. The solids concentration distribution in the deep cone thickener: A pilot scale test

3. A quasi-sequential parameter estimation for nonlinear dynamic systems based on multiple data profiles

4. Developing a heuristics for glass cutting process optimization: A case of two-dimensional two-stage guillotine cutting with multiple stock sizes

5. Design and optimization of heat integrated dividing wall columns for improved debutanizing and deisobutanizing fractionation of NGL

6. Experimental investigation and stability analysis on dense-phase pneumatic conveying of coal and biomass at high pressure

7. Selective hydrogenation of 4-isobutylacetophenone over a sodium-promoted Pd/C catalyst

8. A novel [Bmim]PW/HMS catalyst with high catalytic performance for the oxidative desulfurization process

9. Synthesis gas and char production from Mongolian coals in the continuous devolatilization process

10. Epoxidation of waste used-oil biodiesel: Effect of reaction factors and its impact on the oxidative stability

11. Experimental study on interaction and excess heat release under oxy-fuel combustion of blended coals

12. Effect of soil organic carbon on sorption and desorption of perchloroethylene in soils

13. Removal characteristics and distribution of indoor tobacco smoke particles using a room air cleaner

14. Synthesis of a novel carbon nanofiber structure for removal of lead

15. Effect of agglomeration of silver nanoparticle on nanotoxicity depression

16. Batch and continuous (fixed-bed column) biosorption of Cu(II) by Tamarindus indica fruit shell

17. Effect of supplying a carbon extracting solution on denitrification in horizontal subsurface flow constructed wetlands

18. Neural network prediction of fluidized bed bioreactor performance for sulfide oxidation

19. Recovery of nickel from chromite overburden, Sukinda using Aspergillus niger supplemented with manganese

20. Aqueous processing of nickel spent catalyst for a value added product

21. Lipase from Penicillium camembertii KCCM 11268: Optimization of solid state fermentation and application to biodiesel production

22. Isolation and characterization of autoflocculating mutants of cyanobacterium Arthrospira platensis

23. A new flow path design for multidimensional protein identification technology using nano-liquid chromatography electrospray ionization mass spectrometry

24. Preparation of nylon-6/chitosan composites by nanospider technology and their use as candidate for antibacterial agents

25. Inhibition effect of CO2 on asphaltene precipitation for an Iranian crude oil and comparison with N2 and CH4

26. Isothermal vapor-liquid equilibria for the binary systems of ethylene glycol monopropyl ether with 2,2-dimethylbutane and 2,3-dimethylbutane

27. Kinetic and thermodynamic study of Eu(III) sorption on natural red earth in South China

28. Adsorption ability of oxidized multiwalled carbon nanotubes towards aqueous Ce(III) and Sm(III)

29. Influence of particle distribution on filter coefficient in the initial stage of filtration

30. Structural modeling of petroleum fractions based on mixture viscosity and Watson K factor

31. Solubility of carbon dioxide in ammonium-based ionic liquids: Butyltrimethylammonium bis(trifluoromethylsulfonyl)imide and methyltrioctylammonium bis(trifluoromethylsulfonyl)imide

32. Surface plasmon resonance study of (positive, neutral, negative) vesicles rupture by AgNPs’ attack for screening of cytotoxicity induced by nanoparticles

33. Synthesis and characterization of waterborne polyurethane acrylate copolymers

34. Substitution effect of silica by silane-modified titania on the tensile and dynamic properties of silica-filled SBR compounds

35. A model for estimating agglomerate sizes of non-magnetic nanoparticles in magnetic fluidized beds